Paradox Marine Magel 6130, Инструкция по установке

Страница: 5 / 44

5
Diagram 3
3. Place the console back plate flush against
the mounted wall
plate as shown in Diagram 3.
4. Slide the Marine Magellan
’ s open slots
labeled F (Diagram 3) onto the wall plate
’ s
tabs labeled B.
5. Gently apply downward pressure to insert
the wall plates
tabs into Marine Magellan
’ s open slots.
6. Once the Marine Magellan
’ s power and
communication wires are hooked up
(Electrical Installation, Page 8), Insert two
screws through the wall plate
’ s screw holes
labeled C and into holes labeled E (
Diagram 3 ) in the Marine Magellan back
plate. This will secure the console to the
wall.
Artion GSM Module
It is important that the GSM communication
module be mounted in such a location to
allow accessibility without obvious visibility.
Follow the steps below.
1.) Establish a proper location
2.) Mark the necessary holes to mount the
Artion and allow wiring access.
3.) Drill the mounting holes
4.) Drill the 5/8 wiring access hole
5.) Screw in the top two screws on the
left and right side of the area. Leave
approximately 1/8 inch between the wall
and the underside of the screw head.
6.) Feed your power, trigger and
communication wires through the wiring
hole.
7.) Place the GSM cellular module onto
the top two screws matching up the
respective holes and push downwards
to lock the unit into place.
8.) Depress the two tabs at the base of
the GSM cellular module and remove
the top Cover.
9.) Screw the final two screws on the
bottom of the GSM cellular module.
10.) Place cover back on Artion.
Artion Battery Backup
This case should be mounted in the vicinity
of the Artion. There are four screw holes
inside the metal case at all corners
(Diagram 5).