Paradox Marine Magel 6130, Инструкция по установке

Страница: 14 / 44

14
label is the person who will be using that
password. (Examples: captain, first mate,
owner, etc.)
6.) To program a remote to that user press
“ yes ” otherwise press “ no ” . Only one remote
can be programmed per user.
7.) When prompted to
“ Press any button on
Remote
” , depress any button for 1 second
on your REM1 or REM2 remote control
(Diagram 13).
REM 1 REM 2
Diagram 13
3
–
Communicator
In this section you will assign the various
call-out telephone numbers for the various
recipients. Upon receiving the call, the user
will hear the prerecorded voice label of the
boat name and the condition that exists.
Since the Marine Magellan system sends its
alarm and event notifications directly to the
end user, no central reporting setup is
necessary.
From the
“ Communicator ” menu
Press
“ ok ”
.
Voice Report
The voice report can send out alarm
events to up to five different numbers. By
default whenever an alarm occurs on the
vessel, the first number will receive a call. If
that recipient does not acknowledge the
alarm or disarm the system, the call will
disconnect and move on to the second
number. This process continues in this
fashion through to fifth recipient and then
begins the cycle again two more times To
add recipients, see below: