Paradox Marine Magel 6130, Инструкция по установке, Страница: 12 / 44

12
Section 4: Programming
With the Marine Magellan and Artion
GSM module now powered up and
communicating with each other, it is time to
program the different areas of the system.
Upon initial startup of system, you are
brought to the
“ System Setup ”
menu. As
you go through this programming guide, you
will see screen shots of the Marine
Magellan. The complete layout of the
programming menus can be referenced on
Appendage 7. The installer may wish to
install the zones (wireless sensors) and
PGMS (relays) before programming (See 6
–
Zone Profile and 7
–
Output Profile) Note
1 - Language
The Marine Magellan system is
available in a variety of different languages.
French and English are preloaded, to add
additional languages you will need to
upgrade the firmware. This is a very simple
process that will require the use of the
Paradox UIP-256 and a laptop computer.
Contact Paradox Marine for language
upgrades on your panel.
that the black shaded buttons represent the
button that you need to press. When
navigating through the different menus,
press the center key to go to the
“ next ”
screen. To access the
“ System Setup ”
menu:
1.) Press
“ menu ” from the main screen
2.) Press
“ ok ” and ‘ next ’ to navigate
menu
Select the desired language by pressing the
appropriate number on the main keypad
2 - User Profile
You can program up to sixteen different
users on your Marine Magellan panel. For
security reasons, once you change the
master code (User 1) from the default
“ 1234 ”
you will be prompted to enter the master
code every time that you enter the system
setup menu. A User is defined as a person
with access to the system via a pass code
and/or key fob remote. Common examples
of the Master, user 2, and user 3 are the
owner, captain, and first mate respectively.
Every user can have only one remote each