24
PHYSIO-PORT UP
A9951 Revision C
Cleaning, Maintenance, Disposal
7.4
Checking the Port
USB port
check only:
For a check of the USB port, turn on the PHYSIO-PORT
UP device and connect its USB port to the PC.
1.
Start the Device Manager of the operating system.
2.
Double-click
Ports (COM and LPT)
to view all
ports.
If PhysioPortWin is used or if a USB serial
port/TUSB3410 Device between COM1 and COM4
has been selected
, it is not necessary to choose another
port. Note down the selection because the same port must
be set in PhysioPortWin, and close all windows to return
to the Windows desktop.
If a USB serial port greater than COM4 has been
selected
, one of the ports COM1 through COM4 must be
disabled at the PC so that it can be assigned to the USB
port.
3.
Select one of the ports COM1 through COM4 that is
not needed for other devices and disable it (right-
click > Disable). Confirm the message that the
device will not be functional any longer.
4.
When using the
USB port
:
Right-click
USB - Serial Port
(COM X) and click
Properties.
5.
Click
Port Settings > Advanced
, and at
COM Port
Number
, select the port that you disabled ear-lier.
Select
Yes
if a message appears that this COM port is
already used by another device. The selected port
must be also be set in PhysioPortWin.
6.
Select
OK
where needed and/or close all windows to
save the settings.
Disconnect the USB cable and restart Windows.
