Application, Safety Information
10
PHYSIO-PORT UP
A9951 Revision C
2
Controls and Indicators
Fig. 2-1 Controls and indicators of
PHYSIO-PORT UP
Functions of Button
Button
Message
on display
Function
Push once
H 1
clear memory
Push twice
H 2
set date and time
Push 3 times
H 3
select measurement protocol
Push 4 times
H 4
activate calibration mode
Push 5 times
H 5
display firmware version
Push 6 times
H 6
select energy source
Push 7 times
H 7
enable/disable audio signal
Push 8 times
H 8
toggle pressure unit between
mmHg and kPa
Push 9 times
H 9
select measurement method:
deflation measurement
method or inflation
measurement method
1
Button : push to display the most recent para-
meter readings. The display will show:
- systolic value "S" (unit mmHg or kPa shown on
the display)
- diastolic value "D" (unit mmHg or kPa shown on
the display)
- pulse rate "HR" (unit min
-1
)
The same button is used
- to toggle between the day phase and the night
phase (section "Toggling Between Day and Night
Phase") and
- to program the BP monitor (chapter 3 "Setup")
2
Connection for blood pressure cuff
3
Calibration mark
4
Liquid crystal display (LCD)
5
Button : push to start and stop a
measurement and to confirm entries
6
(Rechargeable) batteries
7
Lid covering battery compartment
8
Nameplate (example)
9
Port for connection to PC (RS232)
10
Port for connection to PC (USB)
