21
PHYSIO-PORT UP
A9951 Revision C
Application
5
Data Output
The measurement data are output via PhysioPortWin.
Put the PC-based system into operation (see
Operator Manual of PhysioPortWin).
Turn off PHYSIO-PORT UP.
Connect PHYSIO-PORT UP to the PC system:
– via cable 2001589-040 if the USB port of
PHYSIO-PORT UP is used (b, Fig. 5-1)
– via cable 2001589-011 if the serial port of
PHYSIO-PORT UP is used (a, Fig. 5-1)
Turn on PHYSIO-PORT UP and wait for the time
to be displayed.
For more information about data output, please refer to
the Operator’s Manual of PhysioPortWin.
When you have finished downloading data to
PhysioPortWin and do not intend to continue working
with this system, disconnect PHYSIO-PORT UP and
turn it off.
Fig. 5-1 Connections for PC cable
a
RS232 port
b
USB port
Warning
Risk to Persons—
Disconnect PHYSIO-PORT UP from other equipment
(f. e. PC) before connecting it to the patient.
Note
If the USB port is used (PhysioPortWin only), it is
necessary to first install the appropriate driver (see
"Software Installation").
