Panther PN-6730-UXP, Руководство пользователя

Страница: 44 / 176

34
3.1 Quick Selection and Adjustment
The instructions on this page will get you a good looking picture 95% of the time. Details on how to
adjust for a good picture the other 5% of the time are given in the rest of this chapter.
1. Select the source by either
a) pressing one of the source
buttons on the remote, or
b) pressing one of the front
panel buttons.
1. When you select Laptop or
Computer, you should adjust
for Black Level and White
Level for best picture.
(“Adjustments for Computer
and Laptop” on page 44)
2. When you use DVD or VCR,
you can adjust color and
brightness in the Video Con-
trols menu. (“Adjustments for DVD and VCR” on
page 48)
Quick setup for laptops
Sometimes several people will bring their laptops,
plug into the side Laptop connector and run their
PowerPoint
®
slide shows. If the color and brightness
of these shows are not satisfactory, the fault is proba-
bly in the Black Level and White Level settings. See
“Adjustments for Computer and Laptop” on page 44
for more on this.
All laptops have different voltage levels for black
and white, and that can cause problems. However,
Panther has a solution: using separate memories for
each laptop.
Set it up this way:
1. Connect a laptop to the Laptop connector on the
side and select Laptop with the remote.
2. Press Auto Setup on the remote.
3. Display a black picture from the laptop. You can
make a black picture quickly with Windows Paint
program.
4. On the remote, press
MENU
> Input Levels >
ENTER
> Auto Black Adjust >
ENTER
.
!
Black Level must be finished before White Level.
5. Display a white picture from the laptop. Make
one with Windows Paint.
6. Select Auto White Adjust (down arrow) in the
Analog Level menu and press
ENTER
. The Panther
is now adjusted for this laptop.
7. If necessary, press P
AN
/Z
OOM
and adjust position
and size. Try the Default Find first.
a) Press
ENTER
enough times to highlight Default.
Press left or right arrow to activate Find.
b) If necessary, press
ENTER
to select Pan and use
the arrows to make minor adjustments.
8. Save this in a numbered memory:
a) Press
MENU
> Memory >
ENTER
.
b) Select Save >
ENTER
.
c) Select an empty memory (no
!
mark) and
press
ENTER
.
d) Press the up arrow and press
ENTER
.
e) Use the up-down arrows to cycle through the
alphabet, numbers and punctuation to write a
name for this memory: your name, your lap-
top’s name. Use the right-left arrows to move
along the line and to leave a space.
f) When finished, press
ENTER
to leave the Name
section. Select Yes and press
ENTER
.
g) Press
PREV
several times to leave the Save
menu.
9. Repeat steps 1. through 8. for each different lap-
top.
10. When you plug your laptop into the Panther
again, recall the settings:
a) Press
MENU
on the remote.
b) Select Recall and press
ENTER
.
c) Select your named memory and press
ENTER
two times.
d) Press
PREV
to clear the menu.
Setup for DVDs and VCRs
You can use the laptop trick above to save for dif-
ferent DVDs or VCRs, too.