Panther PN-6730-UXP, Руководство пользователя

Страница: 106 / 176

96
5.3 RS232 Command List
This is a complete list of the RS232 commands that you can use. Some commands must be used in
pairs to accomplish the change required. Two indexes of RS232 commands follow this section: “Index
of RS232 Commands” on page 102 and “Index of RS232 Codes” on page 104. For ascii values, see
“Table of ASCII Hex Values” on page 95
Increment and Decrement: For toggle commands, such as
Lamp On / Lamp Off, Incr turns it on, Decr turns it off. For
adjustable quantities, such as H-Position, Incr increases the
value one step, Decr decreases it one step.
Get is an inquiry that must always be addressed to a single
display. (displays do not respond when they are addressed
in groups.) The answer is returned as a binary (hex) num-
ber or as text, as noted.
* the ascii character which asks an ascii character in the
response
$ the ascii character which asks for binary (hex) data in
the response
Set is followed by a value in binary (hex) or ascii text, as
noted. Set commands can be addressed to individual dis-
plays or to groups.
@ substitute an ascii character for this symbol in the com-
mand line
# substitute a binary (hex) value for this symbol in the
command line
R
o
w Function
RS232
Commands RS232 Data
Comments Incr Decr Get Set
System Controls
1 Lamp On / Off PON POF PO* State of system (responses to PO*)
PON = Run
POU = UL lockout; cycle power
POX = Timed lockout; wait
POF = Standby
PO1 = Ignition
PO2 = Waiting for power
PO3 = Restrike
PO? = Unknown
2 Frequency Adjust FRU FRD FR$ FW# # = –128 to 127
3 Phase Adjust PHU PHD PR$ PW# # = 0–31
4 V-Position Up / Down VPU VPD To Get/Set V-Position, Get/Set Zoom Top
Edge. For H-Position, Zoom Left Edge.
5 H-Position Left / Right HPL HPR
6 H-Image Control Normal / Flip HF0 HF1 HF* 0 = normal, 1 = flip
7 Curtain on/off CON COF CO* CON = on, COF = off
8 Curtain Color CC$ CC# 1 = red
2 = green
3 = blue
4 = black
5 = white
9 Sharpness SON SOF SO* SON = on, SOF = off
10 Buzzer BON BOF BO* BON = on, BOF = off
11 IR Remote Enable / Disable ION IOF IO* ION = on, IOF = off