Panther PN-6730-UXP, Руководство пользователя, Страница: 114 / 176

104
5.4 Index of RS232 Commands
The numbers in this index are the row numbers in the RS232 Command List table on page 96.
Numerics
1024, 21
50% Gray Field test pattern, 62
A
Alignment Dashes, 66
Alignment test pattern, 66
Aspect Ratio Horizontal, 78
Aspect Ratio Vertical, 79
Auto, 57
Auto Detect, 51, 52
Auto Freq/Phase, 56
Auto Message, 55
Auto Position, 57
Auto Re-strike, 51, 58
Auto Save, 26
Auto-adjust Black Input Level, 33
Auto-adjust White Input Level, 28
B
Black Level, 33
Black test pattern, 61
Blue Color Balance Adjust (gray), 50
Blue Color Balance Adjust
(white), 47
Blue test pattern, 65
Brightness, 93
Buzzer, 10
C
Color Balance, 43
Color Temperature, 44
Command unknown, 118
Command, received
invalid, 116, 117
Contrast, 95
Control, Zoom, 79
Controls, System,
coordinate, X, 41
coordinate, Y, 42
Counter, Lamp Out, 114
Curtain
Color, 8
Curtain Message, 54
Curtain On/Off, 7
D
Decoder, Video, 92
Detect, Auto, 52
E
Edge, zoom bottom, 90
Edge, zoom left, 81
Edge, zoom right, 84
Edge, zoom top, 87
Edges, zoom all, 80
Enable / Disable Auto Re-strike, 58
Error, Parameter, 119
F
Fan Status, 74
Flip, 6
Freq/Phase, Auto, 56
Frequency Adjust, 2
G
Gamma Control, 51
Geometry Pattern, 67
Gray Scale, 68
Gray test pattern, 62
Green Color Balance Adjust
(gray), 49
Green Color Balance Adjust
(white), 46
Green test pattern, 64
H
H in V sync, 27
HDTV, 21
H-Image Control Normal / Flip, 6
Horizontal, 76
Horizontal Aspect Ratio, 78
Horizontal LCD Motor, 76
Hours, Lamp, Read, 14
Hours, Runtime, Read, 18, 19
Hours, System, Read, 16, 17
H-Position Left / Right, 5
Hue, 100
I
ID, version, 113
Input Black Offset Adjust ALL, 34
Input Black Offset Adjust Blue, 37
Input Black Offset Adjust Green, 36
Input Black Offset Adjust Red, 35
Input Level, 27, 28, 33
Input Level Data Blue, 40
Input Level Data Green, 39
Input Level Data Red, 38
Input White Level Adjust ALL, 29
Input White Level Adjust Blue, 32
Input White Level Adjust Green, 31
Input White Level Adjust Red, 30
Input, Select, 20
Invalid command
received, 116, 117
IR Remote Enable / Disable, 11
L
Lamp Count, 12
Lamp Hours Reset, 15
Lamp Hours, Read, 14
Lamp Mask, 12
Lamp On / Off, 1
Lamp Out Counter, 114
Lamp Status, 13
LCD Motor, Horizontal, 76
LCD Motor, Left Edge, 77
LCD Motor, Right Edge, 75
Left Edge LCD Motor, 77
M
Mac, 21
Mask, Lamp, 12
Memory, Recall, 24
Memory, Save, 23
Message, Auto, 55
Message, Source Absent, 53
Mode, Select, 21, 22
Move Sample Point, 40
N
Normal, 6
P
Parameter Error, 119
Phase Adjust, 3
Phase, Auto, 56
Ping, 111
Position, 4, 5, 57
Product ID, 112
R
Read Lamp Hours, 14
Read Runtime Hours, 18, 19
Read System Hours, 16, 17
Read Temperatures, 73
Recall, 19
Recall numbered memory, 24
Received Invalid Command, 117
Received Valid Command, 116
Red Color Balance Adjust (gray), 48
Red Color Balance Adjust
(white), 45
Red test pattern, 63
Remote Enable / Disable, 11
Remove test pattern, 59
Reset Lamp Hours, 15
Responses from display, 115
Re-strike Attempts, 115
Right Edge LCD Motor, 75
Runtime Hours, Read, 18, 19
S
Sample point disable/enable, 43