Panther PN-6730-UXP, Руководство пользователя

Страница: 112 / 176

102
110 Internal Speaker VI0 VI1 VI* 0 = disable, 1 = enable
System Monitor
111 Ping
PNG Verifies that a cube is at an address.
112 Product ID P00 Gets the product ID (hex)
In the About menu, the project number is
573-xxyy-zz. The xx value is returned as a
hex number.
113 Version ID VER Get software version ID (hex)
0x01 = Rev A
0x02 = Rev B
0x03 = Rev C, etc.
114 Lamp Out Counter S1$ S1C Get/Clear lamp out count (number of lamp
out "events", such as power brown-outs.
115 Re-strike Attempts S2$ S2C Get/Clear re-strike count
Responses from display, if it is individually addressed
116 Received Valid Command
ACK Command successfully executed
117 Received Invalid Command NAK Command error on execution
118 Unknown Command UNK Unknown command
119 Parameter Error ERR Parameter outside range
R
o
w Function
RS232
Commands RS232 Data
Comments Incr Decr Get Set
R00 R01 R02
R10 R11 R12
R20 R21 R22
R30 R31 R32
R40 R41 R42
R50 R51 R52
R60 R61 R62
R70 R71 R72
R80 R81 R82
The RS232 codes here produce the
effect of pushing the corresponding
buttons on the remote control. For
instance, sending the code
☺
05R20
"
will toggle the Curtain on or off for the
display with address 05, because that
has the same effect as pressing the
CURTAIN
button on the remote control.
There is no difference to the elec-
tronics module between sending the
R61 command and actually pressing
the up arrow on the remote.
When an ’R’ command opens a
menu, the highlight bar will be where
it was the last time the menu was
closed, and you probably won’t know
where that is.
Some of the ’R’ buttons do not exist
on the physical remote control and
have no function.