BA_PH_680-200_EN_11-22.docx
56
18
Changing the Saw Blade
Work at the saw blades must always be carried out with extreme care.
There is an increased risk of injury due to the very sharp cutting edges!
Protective gloves must be worn when changing saw blades!
18.1
Remove Saw Blade
Figure 64: Remote locking on the slide table
Figure 65: Safety catch on the slide table
•
Turn the main switch on (position “
I
”)
.
•
Set the sawing unit height to the uppermost position and the angle to
0°
.
•
Pull the remote locking (
21
) to unlock the slide table.
•
Push the slide table to the left until the stop. By pressing the safety catch (
20
), see also section
the slide table can be moved out over the stop for changing the saw blade.
•
Fold sawdust flap (
S
) forwards.
•
Turn the saw blade shaft (
W
) by hand until the
grub screw of the tensioning screw is up.
•
Loosen grub screw with an SW 4 pin spanner.
•
Now unscrew the clamping screw by hand
(
left-hand thread!
) and remove together with
the flange.
Figure 66: Fold sawdust flap forwards
Figure 67: Saw blade flange
21
20
W
S
SW4 pin spanner
Saw blade
Flange
Clamping screw
Grub screw
The saw blade must not be tilted when the sawdust flap is open !
