SMARTZONE UPS USER MANUAL
15
UPS Physical Features and Accessories
The following sections provide an overview of the human and electrical interfaces on the
UPS unit. All UPS units are rack mountable with a display on the front side of the unit.
Physical Features
UPS Front Panel
The UPS Front Panel for all 5-10kVA 1-Phase and 10-20kVA 3-Phase Models are the
same. Air flow vents occupy about ¾ of the front panel and a display module occupies
the right ¼ of the front panel. The front panel contains four Status LEDs, a 3.5-inch
color touch screen display and a power ON button.
Figure 3: 5 to 20kVA Front Panel
Air Flow Vents
The air flow vents are very critical to the operation of the UPS unit. These vents must
remain clean and clear of all objects that may restrict the air flow through the UPS unit.
Status LEDs
Each unit has four Status LEDs, Normal LED (green), Battery LED (yellow), Bypass
LED (blue), and Alert LED (Red or Yellow). These LEDs provide a quick high-level view
of the units operating conditions. Refer to Front Panel Display section for further details.
Color Display
The unit has a 3.5-inch touch screen color display. This display is used for monitoring,
controlling, and configuring the UPS. The display should automatically adjust to the
orientation of the unit. To lock the proper orientation, manually configure the setting in
the screen setup page on the display.
