25
24
U S E R MA N UA L
PA N D O R A E L I T E V2
•
SHOCK
— This submenu allows adjusting sensitivity of the alarm
and warning
zones of
the shock sensor.
- Warning and alarm zones are enabled.
- Warning and alarm zones are disabled.
- Warning zone is disabled.
•
MOTION
— This submenu allows adjusting sensitivity of the motion sensor.
- датчик движения включен.
- датчик движения выключен.
•
TILT
— This submenu allows adjusting sensitivity of the tilt sensor
- Tilt sensor is enabled.
- Tilt sensor is disabled.
• EXTERNAL
— This submenu allows adjusting sensitivity of the alarm
and warning zones of
the additional sensor.
- Warning and alarm zones are enabled.
- Warning and alarm zones are disabled.
- Warning zone is disabled.
TRACKING
TRACKING
This menu allows you to switch on and off the tracking function for online services
SIREN
OPTIONS OF SIREN SOUND SIGNALS
This menu allows configuring siren sound notifications.
- all sound signals are enabled.
- warning signals are disabled.
- warning and alarm signals are disabled.
HANDS FREE
SETTINGS OF THE HANDS FREE MODE
This menu allows configuring the Hands Free mode for arming/disarming.
- Enable arming in the Hands Free mode.
- Enable disarming in the Hands Free mode.
- Enable arming and disarming in the Hands Free mode.
- Disable arming and disarming in the Hands Free mode.
CHANNELS
TIME CHANNEL CONTROL
This menu allows switching on/off time channels. These channels are used to implement additional
functions and to control external devices. The channels are configured using the Pandora Alarm Studio
application.
GPS RECEIVER
COORDINATES DETECTION
This menu allows you to switch on and off detection of GPS/GLONASS coordinates.
GSM MODEM
MANAGE THE BUILT-IN MODEM
This menu allows you to switch on and off the built-in GSM-modem.
VALET MODE
SERVICE/VALET MODE
his menu allows activating/deactivating the service (valet) mode (see the “Service mode” section)
SETTINGS
SETTING OF THE REMOTE CONTROL
This menu allows configuring the remote control operation.
• SOUND — This submenu allows switching on/off sound signals.
• VIBRO — This submenu allows switching on/off vibrations.
• BACKLIGHT — This submenu allows adjusting LCD backlight brightness.
• RFM LOST — This submenu allows configuring sound notifications in case of losing connection
between a remote control and a base unit
- Disable notification signals.
- Enable notification by “Connection is lost” ringtone.
- Enable notification by “ALARM” ringtone. The “ALARM” ringtone will be played if the system is armed.
The system will notify you with a short signal one time per minute after the ringtone. The notifications
will come until the connection is established or the notification can be canceled by a short press of
button. If the system is disarmed only one “Connection is lost” ringtone will be played.
• TIME - This menu allows you to set time of the remote. It is required to arm and disarm the system
after to send the changed value to the base unit.
!
d
Ate
ANd
tIme
detectIoN
Is
peRfoRmed
AutomAtIcAlly
foR
systems
WIth
Gsm.
INFORMATION
To get technical information about the remote control, select the INFORMATION
menu by short presses of the
button and briefly press the
button.
