35
34
U S E R MA N UA L
PA N D O R A E L I T E V2
Login
After completing of the registration process, you can login to the online service via a computer’s web
browser or via the mobile apps Pandora Pro or Pandora Online. Use your previously created login/
password to login:
Adding a system to your account
The created account can support up to 3 telemetry systems. Use the information from the “Owner’s
personal card” to add the system to your account.
Go to the “Add a device/Add a system” window and enter the LOGIN and PASS from the “Owner’s
personal card”, create a name for your car and click “Add”.
!
e
RAse
the
pRotectIve
lAyeR
cARefully
. d
o
Not
use
ANy
shARp
objects
to
AvoId
dAmAGING
of
hIddeN
INfoRmAtIoN
uNdeR
the
pRotectIve
lAyeR
.
After this, you will be able to control, change setting and get information about the vehicle state
through the online-service.
!
N
umbeR
of
eveNts
IN
the
hIstoRy
Is
lImIted
. e
veNts
ARe
stoRed
foR
At
leAst
oNe
moNth
.
Control via Bluetooth
The Pandora Pro and Pandora Online applications can work via a Bluetooth channel when there is
no connection to the server. This type of connection allows you to control the system, receive status
information and use your mobile phone as an authorization device.
To get access to these functions, pair a mobile device in the system:
I. ENTER THE PROGRAMMING MODE
Use the VALET button to enter the “Service PIN-code” (default value is 1-1-1-1). See the detailed
instruction of code entering in the “Control the system in case of emergency” section.
II. ENTER THE “PAIRING A MOBILE PHONE” PROGRAMMING LEVEL
After entering programming mode, press and hold the VALET button for 5 seconds (until the fifth
signal of the Siren/Beeper”). The system will enter the “Pairing a mobile phone” programming level. The
LED indicator will light green, the system is ready for pairing.
!
t
he
pRevIously
pAIRed
devIce
WIll
be
eRAsed
fRom
the
system
memoRy
AfteR
eNteRING
the
level
.
III. PAIR A MOBILE PHONE
Turn on Bluetooth on your mobile phone and open the mobile application. Go to : Settings -> Bluetooth
control -> Bluetooth device/ Not specified (Android)» -> + (iOS)/ Add (Android». Select the found system in
the search window, the system and the mobile device will be automatically paired. The system will confirm
pairing with the series of green and red flashes of the LED and a sound signal of the siren.
!
I
f
theRe
Is
No
AutomAtIc
pAIRING
,
eNAble
the
“pIN
Request
foR
phoNe
pAIRING
”
Item
IN
the
“R
AdIo
tAG
ANd
mobIle
devIce
fuNctIoNs
”
sett
INGs
ANd
mAke
the
pAIRING
pRoceduRe
AGAIN
. A
mobIle
devIce
WIll
Request
A
pIN-
code
(f
ActoRy
pRe
-
set
Is
0-0-1-1-1-1
WheRe
4
lAst
dIGIts
ARe
the
“s
eRvIce
pIN-
code
”.
IV. EXIT PROGRAMMING MODE
Turn on the ignition and then turn off to exit programming mode.
!
t
he
system
suppoRts
oNly
oNe
mobIle
devIce
.
