7
6
U S E R MA N UA L
PA N D O R A E L I T E V2
PIN-codes of the system
The “Secret PIN-code”
(is written on the “Owner’s personal card”)
The “Service PIN-code”
(default value is 1-1-1-1)
The “Guest PIN-code”
(default value is 1-2-3-4)
The “Immobilizer PIN-code”
(is used for the Validator (pin-to-drive) function)
!
I
t
Is
RecommeNded
thAt
you
WIll
WRIte
doWN
the
chANGed
oR
cReAted
vAlues
of
All
pIN-
codes
. e
lImINAte
thIRd
-
pARty
Access
to
thIs
INfoRmAtIoN
.
Owner’s personal card
!
e
RAse
the
pRotectIve
lAyeR
cARefully
. d
o
Not
use
ANy
shARp
objects
to
AvoId
dAmAGING
of
hIddeN
INfoRmAtIoN
uNdeR
the
pRotectIve
lAyeR
.
The owner’s personal card contains private information under a protective layer:
• PIN (the “Secret PIN-code”) is a 4-digit number. This code can be used
to disarm the system and to deactivate immobilizer functions and
to activate service mode. It can be also used to enter programming
mode.
• LOGIN is a 10-digit number. This information is used to add the
system to the online service and mobile applications.
• PASS contains 8 characters and can consist of digits, lower and
upper case letters). This information is used to add the system to the
online service and mobile applications.
•
Phone number
is a phone number of the built-in SIM-chip.
CANNOT BE CHANGED
+7-9хх-ххх-хх-хх
1070000000 / Y34aC4vJ
2-2-2-2
LOGIN / PASS
PIN PHONE NUMBER
System modules layout
External VALET button
(VALET button via CAN)
Button for the immobilizer
PIN
Circuit being blocked
Base unit
Beeper
1
2
3
4
5
6
7
External VALET button
An external VALET button with a three-color status LED indicator is placed
inside a vehicle (see the system modules layout).
The button is used for programing the system, arming/disarming,
activating/deactivating immobilizer mode.
