29
28
U S E R MA N UA L
PA N D O R A E L I T E V2
CONTROL THE SYSTEM BY A PHONE
!
f
oR
the
coRRect
opeRAtIoN
of
the
Gsm
fuNctIoNs
,
AN
oWNeR
should
moNItoR
the
stAtus
/
bAlANce
of
the
sIm
cARd
INstAlled
IN
the
system
. I
f
the
sIm
cARd
Is
blocked
oR
defectIve
, Gsm
fuNctIoNs
of
the
system
WIll
be
uNAvAIlAble
.
Call the system’s phone number. When it answers, enter a command code
*I
t
Is
RequIRed
to
eNteR
the
“s
ecRet
pIN-
code
”
AfteR
dIAlING
A
commANd
.
DTMF commands.
For example: To have simple access to engine start function, create a new contact in the contact
list of your phone, name it ‘Engine start’, for instance, and add the number in the following format:
+XXXXXXXXXXX,123*,297* where “+XXXXXXXXXXX” – the system phone number, “,” - pause is a feature
of the phone (can be displayed as the ‘P’, see the instructions of the phone), “123*” - remote engine start
1
1
0
0
0
0
*
*
1
1
2
2
3
3
*
*
5
5
1
1
*
*
Tow truck mode
Request GSM account balance
Start the engine/prolong heating
3
3
2
2
1
1
*
*
Stop the engine
3
3
3
3
3
3
*
*
Switch on add. function using F via CAN
5
5
0
0
0
0
*
*
4
4
5
5
6
6
*
*
6
6
5
5
4
4
*
*
7
7
5
5
3
3
*
*
Request current coordinates
Switch on additional channel
Switch off additional channel
#
#
9
9
*
*
*
*
1
1
5
5
9
9
*
*
Return to previous menu
Repeat the last message
Silent arming
Help
0
0
0
0
*
*
0
0
1
1
*
*
Unlocking trunk
Silent disarming
1
1
*
*
Arming
0
0
*
*
Disarming
Force connection to the server
2
2
5
5
8
8
*
*
System information
1
1
5
5
6
6
*
*
6
6
5
5
1
1
*
*
Switch on engine preheater
Switch off engine preheater
6
6
6
6
6
6
*
*
9
9
9
9
9
9
*
*
Enable engine blocking
Disable authorization devices*
9
9
9
9
8
8
*
*
8
8
8
8
8
8
*
*
Отключение устройств авторизации*
4
4
2
2
4
4
*
*
Fuel level calibration
Enable authorization devices
2
2
2
2
2
2
*
*
Disable Hands Free mode
2
2
2
2
3
3
*
*
Enable Hands Free arming
2
2
2
2
4
4
*
*
Enable Hands Free disarming
2
2
2
2
5
5
*
*
Enable Hands Free disarming
only with autom. start
7
7
8
8
9
9
*
*
Enable automatic engine start
9
9
8
8
7
7
*
*
Disable automatic engine start
2
2
9
9
7
7
*
*
End call
5
5
5
5
1
1
*
*
Enable service mode (see description below)*
5
5
5
5
2
2
*
*
Disable service mode
DTMF command, “297*” - end call DTMF command. Contact can be added as a speed dial to any of the
free button.To have simple access to engine start function a phone other than the main owner’s phone,
create contact in the following format: +XXXXXXXXXXX,1234,123*,297* where ‘1234’ – guest PIN-code.
Activate/Deactivate service mode
1. Call the system number. Wait for the answer.
2. Turn on the ignition, an authorization device (a radio tag, a remote control, a paired mobile phone
with the app installed) must be in the coverage zone, enter the “Immobilizer PIN-code” (if the “Code
immobilizer” function is enabled).
3. To activate service mode, dial the 551* DTMF command — “Activate service mode”, then enter the
“Secret PIN-code” from the owner’s personal card.
4. To deactivate service mode, dial the 552* DTMF command — “Deactivate service mode”.
Voice help
The system has a voice help menu. During a voice call to the system, dial 9* and listen to the information
about system control commands.
To end the session, hang up the phone.
Repeat the last message
To repeat any message, press * during a voice call to the system.
Arming/Disarming
1. Call the system number. Wait for the answer.
2. Dial 1* to arm, and 0* to disarm. For silent arming dial 10* or 00* for silent disarming
3. The system will confirm arming/disarming. To end the session, hang up the phone. Enabling/disabling
automatic engine starts Pandora systems have a function of prompt disabling automatic engine start:
1. Call the system number and wait for the answer.
2. Dial 987* to disable all automatic engine starts or 789* to enable.
3. The system will confirm execution of the command. To end the session, hang up the phone. Automatic
starts can be enabled again by dialing 789* (all previous settings will remain intact).
Request current coordinates
1. Call the system number. Wait for the answer.
2. Dial 500*.
3. The system will confirm: ‘Current coordinates are sent via text message’ and will send text message
