39
38
U S E R MA N UA L
PA N D O R A E L I T E V2
Remote control
Press and hold the
, button on the remote control when you are in the radio coverage zone. The
remote control will play “DISARMING” ringtone and security mode status icon (the lock) will be changed
to .
To disarm the system without sound confirmation press and hold the
button for 1 second
or more.
Radio tag
Radio tag must be in the Bluetooth coverage area. Shortly press the control button
on the tag.
Slave mode
Shortly press the “Unlock” button on an original remote control or use a sensor/button on a door handle
(for cars with an intelligent access system.
Phone
Call the system number. Wait for the answer. Dial the
0 *
command. To disarm the system without siren
signals dial the
0 *
0
command.
Online service
Login to the PANDORA-ON.COM, when the system is online (there is an Internet connection) press the
button on the control panel.
Mobile applications Pandora Online and Pandora Pro
Open the mobile application. When the system is online (there is an Internet or Bluetooth connection),
press and hold the button on the control panel until the scale is fully loaded.
HandsFree mode
Move toward the vehicle with an authorization device .
VALET button
Enter the ”Secret PIN-code” (see the ”Emergency disarming using the VALET button” section).
Locking/unlocking doors when ignition is on
The system allows you to lock and unlock doors when ignition is on. To do this, use one of the
methods described below.
Remote control
Press the
button to lock doors or the
button to unlock doors when you are in the radio
coverage zone.
Mobile applications Pandora Online and Pandora Pro
Open the mobile application. When the system is online (you are in the radio coverage area), press and
hold the button to lock doors or the button to unlock doors on the control panel until the scale
is fully loaded.
Automatic modes
There are automatic lock modes that will lock the doors at the car movement or on switching on the
ignition. When using doors locking mode on car movement start, the system will detect car moving
and perform doors locking (it depends on speed status in a digital CAN-bus or motion sensor sensitivity
settings). When using doors locking mode on switching on the ignition, the doors will be locked
automatically 5 seconds after the ignition was switched on. If any door was opened after the ignition
had been switched on, automatic locking will be disabled to prevent locking the keys inside the car.
Doors can be automatically unlocked when the ignition is switched off.
!
t
hese
modes
ARe
dIsAbled
by
defAult
,
use
the
p
ANdoRA
A
lARm
s
tudIo
to
eNAble
these
settINGs
.
Car search function
To easily find your vehicle on a massive parking, shortly press the
, button when the car is
armed. The system will sound the siren
5х
and flash turn signals
5х
.
To use this function without sound signals press and hold the button for 1 second
.
