![background image](http://html1.mh-extra.com/html/panasonic/wv-sw390-series/wv-sw390-series_operating-instructions-manual_3543451052.webp)
Note
•
Link indicator (orange):
This indicator will light when communication with the connected device is
available.
•
Access indicator (green):
This indicator will light when accessing a network.
•
Live indicator (Red/Orange/Green):
The live indicator will light or blink as follows depending on the
camera status.
Operation status
Indicator status
When the power is turned on
Before the network
connection is established
Blinks orange
When the network
connection is established
Blinks orange
®
Blinks green
®
Lights green
During standby or connection (Cable is not connected.)
Lights orange
During standby or connection (Cable is connected.)
Lights green
During the upgrade process
Blinks orange
During the initialization
Blinks orange
®
Lights off
Port forwarding error caused by the UPnP function
Blinks orange (in 2 seconds
intervals (on for 1 second / off
for 1 second))
Trouble happening on the camera
Blinks red
Failure in writing data on the SDHC/SD memory card
Lights red
[Alarm status update mode]
Select an interval of the camera status notification from the following.
When the status of the camera changes, the alarm occurrence indication button, the [AUX] button or the SD
saving status indicator will be displayed to notify of the camera status.
•
Polling(30s):
Updates the status each 30 seconds and provide notification of the camera status.
•
Real time:
Provide notification of the camera status when the status has changed.
•
Default:
Real time
Note
•
Depending on the network environment, notification may not be provided in real time.
[Alarm status reception port]
When selecting “Real time” for “Alarm status update mode”, designate a port number to which the status change
notification is to be sent.
•
Available port number:
1 - 65535
•
Default:
31004
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
[Automatic installation of viewer software]
Determine whether or not to install the viewer software from this camera.
•
On:
Installs the viewer software from the camera automatically.
•
Off:
The viewer software cannot be installed from the camera.
•
Default:
On
52
Operating Instructions
10 Configure the basic settings of the camera [Basic]
Содержание WV-SW390 Series
Страница 184: ...5 Click Finish 184 Operating Instructions 17 Configuring the network settings Network ...
Страница 221: ...Operating Instructions 221 Notes ...
Страница 222: ...222 Operating Instructions Notes ...
Страница 223: ...Operating Instructions 223 Notes ...