Panasonic WV-SW390 Series, Руководство по эксплуатации

Страница: 86 / 224

MPEG-4(1) / MPEG-4(2)
[MPEG-4 transmission]
Select “On” or “Off” to determine whether or not to transmit MPEG-4 images.
•
On: Transmits MPEG-4 images.
•
Off: Does not transmit MPEG-4 images.
•
Default: On
IMPORTANT
•
When “4:3 (800x600)”
*1
or “16:9” is selected for “Aspect ratio”, MPEG-4 transmission is unavailable.
•
When “H.264” is selected for “Recording format”, MPEG-4 transmission is unavailable.
Note
•
When “On” is selected for “MPEG-4 transmission” in “MPEG-4(1)” or “MPEG-4(2)”, displaying of
MPEG-4 images or JPEG images on the “Live” page will be available.
•
When “On” is selected for “MPEG-4 transmission” in “MPEG-4(1)” and “MPEG-4(2)”, MPEG-4 images
are viewable using other devices with each setting.
•
When “On” is selected for “MPEG-4 transmission” in “MPEG-4(1)” or “MPEG-4(2)”, the transmission
interval of JPEG images may be longer.
[Internet mode (over HTTP)]
Select “On” when transmitting MPEG-4 images via the Internet. It is possible to transmit MPEG-4 images
without changing the broadband router settings configured for JPEG image transmission.
•
On: MPEG-4 images and audio will be transmitted using the HTTP port. Refer to page 163 for further
information about the HTTP port number settings.
•
Off: MPEG-4 images and audio will be transmitted using the UDP port.
•
Default: Off
Note
•
When “On” is selected, only “Unicast port (AUTO)” will be available for “Transmission type”.
•
When “On” is selected, it may take seconds to start displaying MPEG-4 images.
•
When “On” is selected, MPEG-4 images may not be displayed depending on the number of the
concurrent access users and audio data availability, etc.
•
When “On” is selected, only IPv4 access is available.
[Image capture size]
Select “QVGA” or “VGA” for the image capture size of MPEG-4 images.
•
Default:
–
MPEG-4(1): VGA
–
MPEG-4(2): VGA
[Transmission priority]
Select a transmission priority for MPEG-4 images from the following.
•
Constant bit rate: MPEG-4 images will be transmitted with the bit rate selected for “Max bit rate (per
client)*”.
•
Frame rate: MPEG-4 images will be transmitted with the frame rate selected for “Frame rate*”.
•
Best effort: In accordance with the network bandwidth, MPEG-4 images will be transmitted with the bit
rate varying between the maximum and minimum bit rates that are set for “Max bit rate (per client)*”.
•
Default: Frame rate
Note
•
When “Frame rate” is set for “Transmission priority”, number of users who can access the camera may
be limited.
86 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]