Panasonic WV-SW390 Series, Руководство по эксплуатации

Страница: 80 / 224

[Video encoding format]
Select “H.264” for the video encoding format.
•
H.264: H.264 will be set for the video encoding format. The subsequent setting items will be for H.264. The
tab name will be changed to [JPEG/H.264].
•
MPEG-4: MPEG-4 will be set for the video encoding format. The subsequent setting items will be for
MPEG-4. (
®
page 84)
The tab name will be changed to [JPEG/MPEG-4].
•
Default: H.264
H.264(1)/H.264(2)
[H.264 transmission]
Select “On” or “Off” to determine whether or not to transmit H.264 images.
•
On: Transmits H.264 images.
•
Off: Does not transmit H.264 images.
•
Default: On
Note
•
When “On” is selected for “H.264 transmission” in “H.264(1)” or “H.264(2)”, displaying of H.264 images
or JPEG images on the “Live” page will become available.
•
When “On” is selected for “H.264 transmission” in “H.264(1)” and “H.264(2)”, H.264 images are
viewable using other devices with each setting.
•
When “On” is selected for “H.264 transmission” in “H.264(1)” or “H.264(2)”, the transmission interval
of JPEG images may sometimes become longer.
•
When “H.264” is selected for “Recording format”, it is impossible to transmit H.264 images with the
settings for “H.264(2)”. In this case, the settings for “H.264(2)” are invalidated.
[Internet mode (over HTTP)]
Select “On” when transmitting H.264 images via the Internet. It is possible to transmit H.264 images without
changing the broadband router settings configured for JPEG image transmission.
•
On: H.264 images and audio will be transmitted using the HTTP port. Refer to page 163 for further
information about the HTTP port number settings.
•
Off: H.264 images and audio will be transmitted using the UDP port.
•
Default: Off
Note
•
When “On” is selected, only “Unicast port (AUTO)” will be available for “Transmission type”.
•
When “On” is selected, it may take time to start displaying H.264 images.
•
When “On” is selected, H.264 images may not be displayed depending on the number of the concurrent
access user and audio data availability, etc.
•
When “On” is selected, only IPv4 access is available.
[Image capture size]
Select the image capture size from the following.
When “4:3” is selected for “Aspect ratio”
SC384
–
H.264(1): QVGA/ VGA/ 1280x960
–
H.264(2): QVGA/ VGA
When “4:3 (VGA)” is selected for “Aspect ratio”
SW396 SW395 SC386 SC385
–
H.264(1): QVGA/ VGA/ 1280x960
–
H.264(2): QVGA/ VGA
When “4:3 (800x600)” is selected for “Aspect ratio”
SW396 SW395 SC386 SC385
–
H.264(1): QVGA/ 800x600/ 1280x960
80 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]