Panasonic WV-SW390 Series, Руководство по эксплуатации

Страница: 138 / 224

The VMD areas can be set up to 4 areas for each preset position (
SW395 SC385 SC384
: maximum 64
preset positions/
SW396 SC386
: maximum 256 preset positions). When motion is detected in the set area,
it will be regarded as an alarm. The camera can be configured to take an alarm action even when the camera
is not at the preset position.
IMPORTANT
•
The alarm occurrence indication button (
®
page 10) will be displayed when motion is detected by the
VMD function.
•
The alarm occurrence indication button will be displayed when receiving an alarm input of a terminal
alarm or a command alarm.
•
Depending on the network environment, notification may be delayed even when “Real time” is selected
for “Alarm status update mode” on the [Basic] tab of the “Basic” page (
®
page 49).
•
The motion detection function is not the dedicated function to prevent thefts, fires, etc. We are not
responsible for any accidents or damages occurring in case.
VMD area setting
[Select a preset position]
Select a preset position number to which the VMD area is to be set, and click the [Start] button.
When setting an area which is not at the preset position for the VMD area, select VMD activation in area “except
the preset positions”.
VMD information addition
[Information addition]
Select “On” or “Off” to determine whether or not to add VMD information to superimposed image data.
138 Operating Instructions
13 Configure the alarm settings [Alarm]