Panasonic WV-SFV531, Руководство по эксплуатации

Страница: 117 / 228

[Audio encoding format]
Select the audio reception encoding format from G.726, G.711, AAC-LC and AAC-LC(HIGH QUALITY).
•
Default: G.726
Note
•
G.711 is available only when “Mic input” is selected for “Audio transmission/reception”.
•
G.726 is always applied for the audio transmission encoding format.
[Audio bit rate]
Select the audio bit rate used to transmit/receive audio data.
When G.726 is selected for “Audio encoding format” : 16kbps/ 32kbps
When AAC-LC(HIGH QUALITY) is selected for “Audio encoding format” : 64kbps/ 96kbps/ 128kbps
•
Default: 32kbps
IMPORTANT
•
When “AAC-LC(HIGH QUALITY)” is selected, there are limitations about the following function.
–
“SD memory card” is not available.
–
“Audio detection” is not available.
–
HTTPS is not available.
–
The maximum concurrent access number is limited to 5.
Note
•
When selecting a smaller value for “Bandwidth control(bit rate)” (
®
page 151) while putting a priority
on the JPEG image transmission, select “16kbps” for “Audio bit rate”.
•
[Audio bit rate] is unavailable when “G.711” or “AAC-LC” is selected for “Audio encoding format”.
[Mic input volume (Camera to PC)]
Select a volume level on the PC to hear audio transmitted from the camera.
•
Mic High: The volume level will become high. This setting will be applied when audio is input to the camera
using a microphone.
•
Mic Middle: The volume level will become middle. This setting will be applied when audio is input to the
camera using a microphone.
•
Mic Low: The volume level will become low. This setting will be applied when audio is input to the camera
using a microphone.
•
Line High: The volume level will become high. This setting will be applied when audio is input to the camera
using the Line input.
•
Line Middle: The volume level will become middle. This setting will be applied when audio is input to the
camera using the Line input.
•
Line Low: The volume level will become low. This setting will be applied when audio is input to the camera
using the Line input.
•
Default: Mic Middle
Note
•
These settings are linked with the volume settings of “Audio recording” and “Audio detection”.
[AGC(audio)]
Automatically adjusts the audio reception to a suitable volume. The degree to which the volume is adjusted
can be selected from High/Middle/Low.
When “High” is selected, it is easier to hear quiet sounds, but sounds may be heard as noise. If you do not
want to hear noise, select “Middle” or “Low”.
•
Default: High
Operating Instructions 117
11 Configure the settings relating to images and audio [Image/Audio]