Panasonic WV-SFV531, Руководство по эксплуатации

Страница: 118 / 228

Note
•
This setting is also applied to the volume for [Audio recording] and [Audio detection].
IMPORTANT
•
If the [AGC(audio)] setting is changed after configuring [Audio detection], the volume of the sound that
is detected with [Audio detection] may change. In this case, make sure to check the [Audio detection]
setting.
[Mic input interval (Camera to PC)]
Select an interval for audio reception from the following.
20ms/ 40ms/ 80ms/ 160ms
•
Default: 40ms
Note
•
When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected,
audio interruption may be diminished even though the delay time will be longer. Select the interval
according to the network environment.
•
“Mic input interval (Camera to PC)” is unavailable when “AAC-LC” is selected for “Audio encoding
format”.
[Audio output volume (PC to Camera)]
Select a volume level on the camera to hear audio transmitted from the PC.
High/ Middle/ Low
•
Default: Middle
[Audio output interval (PC to Camera)]
Select an interval for audio transmission from the following.
160ms/ 320ms/ 640ms/ 1280ms
•
Default: 640ms
Note
•
When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected,
audio interruption may be diminished even though the delay time will be longer. Select the interval
according to the network environment.
•
Audio may temporarily be interrupted and noise may be heard when multiple users are accessing the
camera concurrently. It may be possible to diminish the interruption or noise by setting a longer interval
for “Audio output interval (PC to Camera)”.
•
Audio may sometimes not be heard depending on the network environment.
[Audio output duration]
Configure the maximum duration for each time audio is outputted.
1min/ 2min/ 3min/ 5min/ 10min/ 20min/ 30min/ 1h
Default: 5min
Note
•
Audio output stops when the specified time has passed. To turn the audio transmission function on,
click the Audio output button again.
[Audio output port (PC to Camera)]
Enter the transmission port number (the port number on the camera used to receive audio data transmitted
from the PC).
•
Available port number: 1024-50000 (Only even numbers are available.)
•
Default: 34004
118 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]