11.7 Configure the VIQS setting
Click the [Setup>>] button of “VIQS” on the [Image quality] tab of the “Image/Audio” page. (
®
page 85)
The VIQS function can change the data size of images before sending them by performing operations such
as increasing the resolution of important monitoring points in the image and reducing the resolution of other
areas.
VIQS can be used to adjust the operations of monitoring systems to match their installation environments by
performing operations such as reducing the amount of data saved on recorders and the bandwidth used when
sending images. VIQS is only available for H.264 images and can only increase the resolution of a maximum
of 40% of an image.
Up to 2 VIQS areas can be set.
When checking the images after configuring the VIQS setting, display the H.264 images on the “Live” page.
[Delete]
Deletes the VIQS area. Click the [Set] button to delete the VIQS area.
[VIQS(H.264(1))]
Select “On” or “Off” to determine whether or not to activate the VIQS function for the transmitted (H.264(1))
images.
•
Default:
Off
[VIQS(H.264(2))]
Select “On” or “Off” to determine whether or not to activate the VIQS function for the transmitted (H.264(2))
images.
•
Default:
Off
Operating Instructions
99
11 Configure the settings relating to images and audio [Image/Audio]
