![background image](http://html.mh-extra.com/html/panasonic/wv-sf138/wv-sf138_operating-instructions-manual_277980113.webp)
5.
To delete the VMD area, click the [Delete] button corresponding to the area to be deleted.
→
The outline of the respective VMD area will disappear.
6.
Click the [Set] button.
→
The edited settings will be applied.
13.5 Configure the settings relating to the audio
detection [Audio detection]
Click the [Audio detection] tab on the “Alarm” page. (
®
page 40, page 42)
The settings relating to audio detection can be configured in this section. When the configured audio detection
level is exceeded, the alarm action will be performed.
The audio detection level can be adjusted in 10 levels.
In order to use the perform audio detection, audio settings must be configured. (
®
page 102)
IMPORTANT
•
The alarm occurrence indication button will be displayed when sound is detected by the audio detection
function. (
®
page 9)
•
The alarm occurrence indication button will also be displayed when receiving an alarm input of a
command alarm.
•
Notification may be delayed in some network environments even when “Real time” is selected for
“Alarm status update mode” on the [Basic] tab of the “Basic” page. (
®
page 46)
•
The audio detection feature is not designed to be used in situations that require high reliability. We are
not responsible for any accidents or damages that may occur.
A
Preview
Displays a preview of the settings and the actual audio detection status.
[Audio detection]
Select “On” or “Off” to determine whether or not to perform audio detection.
Operating Instructions
113
13 Configure the alarm settings [Alarm]