Panasonic WV-SC588, Руководство по эксплуатации

Страница: 14 / 228

•
Possible duration of audio transmission is up to 5 minutes per transmission. When 5 minutes have
passed, the audio transmission will automatically stop. To turn the audio transmission function on,
click the Audio output button again.
•
When the camera is restarted, the adjusted volume level (for both the audio transmission and
reception) will return to the level that had been set on the [Audio] tab on the setup menu.
(
®
page 125)
•
Actual volume level will change in three steps even though the volume cursor can be adjusted
minutely.
SD recording status indicator
The status of the SD recording can be checked with this indicator.
When the SD recording starts, the SD recording status indicator will light red. It will go off when the SD
recording stops.
This indicator will be displayed when “Manual” or “Schedule” is selected for “Save trigger” on the setup
menu. (
®
page 59)
Main area
Images from the camera will be displayed in this area.
The current time and date will be displayed according to the settings configured for “Time display format”
and “Date/time display format”. (
®
page 54)
In addition, when being adjusted, the status of brightness (
®
page 55), camera position (
®
page 93),
and the preset ID (
®
page 108) will be displayed as well as the characters configured for “Camera title on
screen” (
®
page 54). The number of lines for the display is 3.
Click a desired point in the main area on the “Live” page that is to be the center of the angle of view. The
camera moves to adjust the position in order to set the clicked point as the center.
*4
When selecting an area in the main area by dragging the mouse, the selected area will be located at the
center of the main area. In this case, the zoom ratio will be adjusted automatically.
*4
Zoom can be adjusted using the mouse wheel.
When the main area of the “Live” page is right-clicked, “Auto track” starts for the clicked object. Depending
on the targeted object or its surroundings, “Auto track” may not perform normally.
Note
•
When operated by a lower access level user, images displayed on the screen may be changed
temporarily. This does not affect operation of the camera.
•
When the displayed image is being zoomed in more than 30x, the clicked point may not always be
located at the center of the main area.
•
When the mouse is dragged to move the camera beyond its operable range, the camera will move
to the requested direction and will stop at the end of the operable range. Then, the zoom ratio of
the displayed image will automatically be adjusted.
•
Depending on the PC in use, screen tearing* may occur when the shooting scene drastically
changes due to the GDI restrictions of the OS.
*A phenomenon in which portions of the screen are displayed out of alignment.
*1 Only operable by users whose access level is “1. Administrator”.
*2
Only operable by users whose access level is “1. Administrator” or “2. Camera control” when “On” is selected for “User auth.”
(
®
page 151)
*3 Operable by users who belong to the access level selected for “Permission level of audio trans./recep.” on the [Audio] tab of the
“Image/Audio” page. Refer to page 125 for the permission level of audio.
*4
As the tilt angle approaches 90°, because the difference between the specified position and the actual direction the camera is moving
increases, the camera may not move to the specified angle of view.
14 Operating Instructions
1 Monitor images on a PC