Panasonic WRKT4504E Series Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 40

background image

Switching/Blind Actuator

25

4.1.3.5

Central Switching:

With the central switching, the behaviour of the channels is identical  with  'normal' activation via the
"Switching"  object.  If  the  central  switch  object  is  set  to  “1”,  the  channels  which  are  participated  to
central switching are switched on and if it is set to “0” the participated channels are switched off. For
participating a channel to central switch function, this must be specified by the “Participation in central
switch” parameter.

4.1.3.6

Central Continuous ON:

Central  continuous  ON  object  is  prior  to  all  other  objects.  This  means  that  if  the  central  continuous
ON  object  is  set  to  “1”  the  channels  which  are  participated  to  central  continuous  on  function  are
switched on regardless of all other objects (switch object, central switch object, linking objects…etc).
If  the  central  continuous  on  object  is  set  to  “1”,  the  participated  channels  stay  continuously  ON
position and they can not be swithed off until this object is set to “0”.

4.1.3.7

Central Continuous OFF:

Central  continuous  OFF  object  is  prior to  all other objects.  This  means that  if the central  continuous
OFF  object  is  set  to  “1”  the  channels  which  are  participated  to  central  continuous  off  function  are
switched off regardless of all other objects (switch object, central switch object, linking objects…etc).
If  the  central  continuous  on  object  is  set  to  “1”,  the  participated  channels  stay  continuously  OFF

position and they can not be swithed on until this object is set to “0”. The important point is Central
continuous On object is prior to Central continuous Off object. This means if both of objects are set to
“1” at the same time, the participated channels are switched on continuously.

4.1.3.8

Feedback Function

Feedback object is a 1bit object that sends the channel status to bus. It says to bus the channel status.
For ON position it sends “1” and for OFF position it sends “0” to bus. Each channel has to be
participated to feedback function from the “Sending feedback” parameter. There are five possible
selections in this parameter:



No :

Do not use feedback.



Yes, only on change, non-inverted:

Use feedback only when the channel status is changed

and send the channel status as non-inverted format.



Yes, cyclical and on change, non-inverted :

Use feedback when the channel status is

changed and cyclical and send the channel status as non-inverted format.



Yes, only on change, inverted:

Use feedback only when the channel status is changed and

send the channel status as non-inverted format.



Yes, cyclical and on change, inverted:

Use feedback when the channel status is changed and

cyclical and send the channel status as non-inverted format.

«
...
23
24
25
26
27
...
»

Содержание WRKT4504E Series









































Отзывы:

Нет отзывов

Похожие инструкции для WRKT4504E Series

Бренд: S&C Страницы: 40

Бренд: S&C Страницы: 34

Бренд: Valve Concepts Страницы: 16

Бренд: U-Prox Страницы: 31

Бренд: KAR-TECH Страницы: 28

Бренд: 2M Technology Страницы: 17

Бренд: 2iB Страницы: 5

Go!Control Panel

Бренд: 2gig Technologies Страницы: 78

Бренд: Manfrotto Страницы: 16

Бренд: Baby Trend Страницы: 8

Бренд: Baby Trend Страницы: 19

Бренд: Baby Trend Страницы: 5

Бренд: Baby Trend Страницы: 4

Бренд: VAT Страницы: 26

Бренд: Samson Страницы: 73

Бренд: halstrup-walcher Страницы: 39

Бренд: Samson Страницы: 48

Бренд: National Instruments Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды