Switching/Blind Actuator
8
3
Before Operation
3.1
Connection
Every output (C1, C2, C3 …..) can be used separately for switching or for blind/shutter control in pair.
(C1-C2, C3-C4…….). Belobe figure shows possible connections.
1.
Status leds for output channels:
When led is on the output channel is on. When led is off output
channel is off.
•
Channel ON = Relay contact is CLOSE
•
Channel OFF = Relay contact is OPEN
2.
Control button for output channels:
Allows control output channels manually.
3.
Manual button and led:
When led is on only manual control is allowed. Device does not response to
bus commands.
4.
Set physical address button and led:
KNX programming button and led.
5.
Lock for upper and lower modules:
The device consists of two parts. Lower part which has relays and
upper part which runs application. KNX application is loaded to upper part of the device. Upper part
can be removed with unlock all switches (5).
