Panasonic Workio DP-3030, Руководство по обслуживанию

Страница: 151 / 486

151
DP-2330/3030
MAR 2005
Ver. 2.1
DP-2310/3010
<J70~79, 92, 93 and 94 Codes>
DP-2330/
3030
DP-2310/
3010
Contents Section
J70 J70 Read Point Sensor does not detect paper within a predetermined
time in the ADF.
(Information Code 030 is printed on the Transaction Journal instead.) E
J71 J71 Read Point Sensor keeps detections paper after a predetermined
time in the ADF.
Original was longer than 78.7 in (2m).
(Information Code 031 or 032 is printed on the Transaction Journal
instead.)
J72 J70 Eject Sensor does not detect paper within a predetermined time after
the Read Point Sensor is activated.
J73 J71 1. Eject Sensor keeps detecting paper after a predetermined time.
2. Eject Sensor keeps detecting paper after the Read Point Sensor
is deactivated.
J76 J71 The Duplex Eject Sensor does not detect paper during 2-Sided
Scanning.
J78 J71 The Duplex Eject Sensor keeps detecting paper during 2-Sided
Scanning.
J79 J70 Read Point Sensor keeps detecting paper in the ADF.
J92 J70 The Original was pulled out when feeding an original.
J93 J70/J71 The Original remained in the ADF.
J94 J70 Abnormal Timing (Paper Jam):
1. The Original was too small.
2. Duplex Eject Sensor detects Original during paper ejecting.
J94 J71 The ADF does not go off after the predetermined time.