Panasonic WJHD309A - DIGITAL DISK RECORDER, Руководство по эксплуатации

Страница: 180 / 182

Network Operating Instructions (PDF)
Add this step between steps 5 and 6. (page 50)
After completing the settings for data copy in step 3, move
the cursor to the SIZE button using the arrows button and
press the SET button to start the recorded images size cal-
culation.
(When it is unnecessary to calculate approximate size, skip
this step.)
When calculation is complete, the following window will be
displayed.
Copy Drive: Destination disk
SIZE: Size of the recorded images to be copied
Available disk space: Available disk space size of the
destination disk
When the available disk space is smaller than the size of
the recorded images, the recorded images will be copied
corresponding to the available disk space.
Click the CLOSE button to close the calculation result win-
dow.
Notes:
• When the available disk space is displayed as "**KB",
check the following.
• Check if "Disk End Mode" is set to "STOP". (Refer to
the Network Setup Instructions.)
• Check if the selected COPY DRIVE is correct.
• Check if the media is formatted correctly.
• When the size of the recorded images is displayed as
"00KB", check the following.
• Check if at least one camera channel is selected or
if images had surely recorded in the designated
time range.
• When it fails to calculate size of the recorded images
because of the HDD access error, etc., the message
"Failed!" will be displayed.
If this message is displayed repeatedly, contact the
dealer.