12
!1
PS·Data Ports (DATA)
Connect PS·Data compatible devices with these ports.
!2
Mode Switches (MODE)
Set the operation mode of this unit with these dip
switches.
!3
RS485 Ports (RS485 (CAMERA))
Connect RS485 compatible combination cameras with
these ports.
!4
Network Port (10/100BASE-T)
Connect this unit to a network compatible with 10BASE-
T or 100BASE-Tx when controlling this unit using a PC
via a network.
!5
Copy Port (COPY1)
Connect a recommended external recording device to
this port.
!6
Extra Storage Port (EXT STORAGE)
Connect an optional extension unit (WJ-HDE300 series)
with this port.
!7
Power Switch (POWER)
Turns the power of this unit on and off.
!8
Signal Ground Terminal (SIGNAL GND)
!9
Power Cord Inlet (AC IN)
Connect the power cord to this inlet.
@0
Cable Clamp
Fix the cables with this cable clamp to prevent discon-
nection or unstable connections that may cause record-
ing failures or an unstable system.
■
On Monitor 1 (To display only
live image)
The negative circled numbers indicate the default positions
of camera title
q
, time
w
and event display
e
.
Important:
• The SETUP MENU will be displayed on monitor 2 and
the VGA monitor. (It is impossible to display the SETUP
MENU on monitor 1.)
• It will take around 2 minutes to display live images on
monitor 1 after turning on the power of the unit.
1. Camera Title
Displays the edited camera title.
A position to display the camera title can be selected
from the following.
Upper left, upper right, lower left, lower right, center
The default camera title position is upper right (R-
UPPER).
Note:
The camera title will be displayed with 16 charac-
ters (2 lines: 8 characters per line).
2. Time
Displays the current time (hour:minute:second) and
date (month:day:year).
A position to display the time can be selected from the
following.
Upper left, lower left, upper right, lower right
The default time display position is upper left (L-
UPPER).
Notes:
• When the camera title and the time display are lay-
ered, only the time display will be displayed.
• When monitor 1 is selected, it is possible to turn
on/off display of the camera title and the time by
pressing the camera selection button 8 for the WJ-
HD316A (the camera selection button 6 for the WJ-
HD309A) while the shift function is on (by pressing
the SHIFT button).
3. Event Display
When an event has occurred, an event display will be
displayed.
The position of an event display will be symmetrical to
the position where the time is displayed. When the time
is displayed at the lower left of the screen, an event dis-
play will be displayed at the upper right corner of the
screen. The default position of an event display is the
upper right corner of the screen (R-UPPER).
The event display will be displayed differently as follows
depending on which event has occurred.
VMD-*:
When motion is detected.
LOSS-*:
When video loss has occurred.
COM-#:
When a command alarm has occurred.
TRM-#:
When a terminal alarm has occurred.
*: Camera number (1 - 16 for the WJ-HD316A, 1 - 9 for
the WJ-HD309A)
#: Alarm number
Note:
Refer to page 49 for further information about
event types and event actions.
q
q
q
q
q
w
e
w
e
we
we
Содержание WJHD309A - DIGITAL DISK RECORDER
Страница 182: ...P NM0805 0 3TU001442AAA Printed in Japan ...
