Panasonic WJHD309A - DIGITAL DISK RECORDER, Руководство по эксплуатации

Страница: 11 / 182

11
q
Audio Input Connectors (AUDIO IN 1 - 4)
These connectors, for RCA pin jacks, accept an unbal-
anced –10 dBV, 10 k
Ω
line input audio signal supplied
from an external device such as a microphone amplifi-
er.
w
Audio Output Connector (AUDIO OUT)
This connector, for an RCA standard jack, supplies an
unbalanced –10 dBV, 600
Ω
line output audio signal to
an external device.
Recorded audio will be supplied from this connector
during playback.
e
Video Input Connectors (CAMERA IN 1 - 16 for the
WJ-HD316A/CAMERA IN 1 - 9 for the WJ-HD309A)
Connect system cameras or combination cameras to
these BNC connectors. Refer to page 72 for the impor-
tant notice about the BNC cables to be used.
A 75
Ω
termination is made unless the video output ter-
minal is connected.
To connect combination cameras, connect them to the
CAMERA IN 1 - 8 connectors of the WJ-HD316A, or the
CAMERA IN 1 - 6 of the WJ-HD309A (accept coaxial
communication).
r
Video Output Connectors (CAMERA OUT 1 - 16 for
the WJ-HD316A/CAMERA OUT 1 - 9 for the WJ-
HD309A)
These BNC connectors supply video signals looped
through the video input connectors. Refer to page 72
for the important notice about the BNC cables to be
used.
Note: Video signals will not be supplied from the CAM-
ERA OUT 1 - 8 connectors if the power of the unit is
off.
■
Rear View
[WJ-HD309A]
[WJ-HD316A]
IN
OUT
CASCADE
OUT
3
2
1
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
1 2
VIDEO
AUDIO IN AUDIO OUT
P S · D a t a
MONITOR OUT CASCADE IN MONITOR (VGA) ALARM/CONTROL
SERIAL ALARM
POWER
COPY 1
MODE
EXT STORAGE 10/100BASE-T RS485(CAMERA) DATA
AC IN
SIGNAL GND
1
4 2
1
1 8
2
IN
OUT
CASCADE
OUT
16
16
3
15
15
14
14
13
2
1
13
12
12
11
11
10
10
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
VIDEO
AUDIO IN AUDIO OUT
MONITOR OUT CASCADE IN MONITOR (VGA) ALARM/CONTROL
SERIAL ALARM
POWER
COPY 1
MODE
EXT STORAGE 10/100BASE-T RS485(CAMERA) DATA
AC IN
SIGNAL GND
1
4 2
1 8
w t y u i
o !0 !1 !3 !5 !8
!2 !4 !6 !7 e
r !9 @0
w t y u i
o !0 !1 !3 !5 !8
!2 !4 !6 !7 q e
r !9 @0
q
t
Monitor Output Connectors (MONITOR OUT1, MONI-
TOR OUT2/CASCADE OUT)
Connect monitors to these BNC connectors. Refer to
page 72 for the important notice about the BNC cables
to be used.
The MONITOR OUT2 connector can also be used as
the CASCADE OUT connector.
When using two or more units of the WJ-HD316A/WJ-
HD309A and using the MONITOR OUT2 connector as
the CASCADE OUT connector, connect with the CAS-
CADE IN connector of another WJ-HD316A/WJ-
HD309A.
y
Cascade In Connector (CASCADE IN)
Connect with the CASCADE OUT connector of another
WJ-HD316A/WJ-HD309A when using two or more units
of the WJ-HD316A/WJ-HD309A.
u
Serial Connector (SERIAL)
Connect a PC with this D-Sub 9-pin connector when
controlling this unit.
i
Monitor Connector (MONITOR (VGA))
Connect a VGA monitor with this connector. The same
video signal supplied to the MONITOR OUT2 connector
will be supplied to this connector.
o
Alarm Connector (ALARM)
Connect an external device such as a sensor or a door
switch with this D-Sub 25-pin connector.
!0
Alarm/Control Connector (ALARM/CONTROL)
Connect a control switch with this D-Sub 25-pin con-
nector when controlling this unit using an external
device, or when controlling an alarm device such as a
buzzer or a lamp.