Panasonic WJHD309 - DIGITAL DISK RECORDER, Инструкции по установке

Страница: 77 / 101

77
Setup item
■
FTP Server Address
Enter an address or name (up to 255 characters) of the
FTP server that receives images. To enter an FTP serv-
er name, it is necessary to select "MANUAL" or "AUTO"
for "DNS".
■
User Name
Enter a user name (login name) to access the FTP serv-
er.
Enter up to 32 alphanumeric characters.
The available characters are the characters listed
below.
■
User Password
It is necessary to register a password when sending
images to the FTP server. Enter up to 32 alphanumeric
characters.
The available characters are the characters listed
below.
Entered character for the password will be displayed as
"*".
■
Mode
Select an action mode for sending images to the FTP
server. Change to "Passive" when sending images is
difficult with "Sequential".
Periodical transmission
Perform the following settings when periodically sending
recorded images.
Ftp send by periodic timer
Perform the following settings to periodically send
recorded images. Perform the setting to determine
whether or not to send recorded images to the FTP
server using the timetable (page 49).
■
Server Directory
Enter a directory of the server. Enter up to 32 alphanu-
meric characters.
The available characters are the characters listed below
except (* : < > ? \ | ~).
■
File Name
Perform the settings for the rules about the file name to
be sent.
Select whether to "Use the time and date as a file
name" or "Use a number as a file name".
■
Interval
Enter a transmission interval. Select whether it will be
"s" (seconds) or "m" (minutes) for the interval unit.
■
Channel to Send
CAM 1-16: Select a camera channel from which images
will be sent periodically.
Images from the checked camera channel will be sent
to the FTP server.
Ftp send by alarm
Perform the following settings to send images recorded
in the location where an alarm occurred. Perform the
setting to determine whether or not to send images
recorded in the location where an alarm occurred to the
FTP server using the timetable (page 49).
■
Server Directory
Enter a directory of the server. Enter a case-sensitive
directory name. Enter up to 32 alphanumeric charac-
ters.
The available characters are the characters listed below
except (* : < > ? \ | ~).
■
File Name
Perform the settings for the rules about the file name to
be sent.
Select whether to "Use the time and date as a file
name" or "Use a number as a file name".
■
Duration-Pre
Select the transmission duration for the pre-recorded
images from the following.
OFF/1 s - 10 s (in 1 second intervals)
Important:
Pre-recorded images will not be transmitted when
event pre-recording is not to be performed. Perform
event pre-recording to transmit the pre-recorded
images. Refer to page 44 for further information
about the event pre-recording settings.