Panasonic WJHD309 - DIGITAL DISK RECORDER, Инструкции по установке

Страница: 80 / 101

80
■
Attach Alarm Image
Select ON or OFF to determine whether or not to attach
an image to an e-mail to be sent at an event occur-
rence.
■
Mail Server Address
Enter an IP address or a name of the SMTP server to
send e-mails to. To enter an SMTP server name, it is
necessary to select "MANUAL" or "AUTO" for "DNS".
Enter up to 255 alphanumeric characters (including
hyphens (-) and periods (.))
Send to
Perform the settings for a destination of any alarm mails
(refer to the network operation instructions), problem
mails (page 97) and error mails (page 98). Enter mail
addresses after checking "Destination 1 - 4".
Up to 4 destination can be registered.
Check the desired mail type (problem/alarm/error) to be
sent.
■
From address
Enter the mail address of a sender. Entered mail
addresses will be displayed in the "From" (sender) line.
Enter up to 255 alphanumeric characters.
Entering hyphens (-) and periods (.) is possible.
■
POP Server address
Select ON or OFF to determine whether to enable or
disable the POP server authentication before sending e-
mails using the SMTP server.
When "ON" is selected, perform the following settings.
■
User Password
Enter a password to access the POP server.
Enter up to 32 alphanumeric characters including
hyphens (-) and periods (.).
The available characters are the characters listed
below.
■
User Name
Enter a user name (login name) to access the POP
server.
Enter up to 32 alphanumeric characters.
The available characters are the characters listed
below.
■
Password
Register a password to access the POP server. Enter
up to 32 alphanumeric characters. An entered character
for the password will be displayed as "*".
Note:
The following characters can be entered:
A B C D E F G H I J K L M N O P Q R S T U V W
XY Z a b c d e f g h i j k l m n o p q r s t u v w x y z 0
12 3 4 5 6 7 8 9!#$%' ()*+, - ./: ;<=>?@[ ¥ ] ^ _`{|}~
Setup item