38
Screenshot 3
The "VMD Area Setup" menu will be displayed.
Step 4
Set the motion detection areas by dragging the mouse.
Up to 4 areas (A, B, C, D) can be set for the detection
areas.
A: White
B: Blue
C: Green
D: Red
Click the [SET ALL AREA] button to set all areas on the
monitor as the motion detection area.
To delete a detection area, click the [DELETE AREA]
button after selecting a detection area by checking the
check box of the desired area to be deleted.
Step 5
Press the [
i
] button to select the sensitivity for the
selected area from the following.
OFF:
No motion will be detected in this area.
LOW:
Low sensitivity
MID:
Standard sensitivity
HIGH: High sensitivity
Step 6
Perform the settings of the detection mode (method of
detection) in the set detection area. Specifying a
method of detection in a detection area is available by
setting the detection mode.
Refer to page 39 for further information about each
recording mode.
<ANY AREA>
An event action will be performed according to the
settings when "motion" is detected in any of the set
motion detection areas.
<VECTOR>
Move the cursor to an area for the settings of VEC-
TOR using the arrows button (
i
) and rotate the jog
dial to select an area. Move the cursor to the para-
meter box of the selected area using the arrows but-
ton (
i
) to select an interval time for an object mov-
ing between each area from the following.
--/5 s/10 s/20 s/30 s/40 s/50 s/1 m
<DURATION>
Move the cursor to the parameter box of each area
using the arrows button (
i
) and rotate the jog dial
to select a moving duration for an object in each
area from the following.
0 s/5 s/10 s/20 s/30 s/40 s/50 s/1 m
Step 7
Click the [SET] button after completing the settings, and
close the "VMD Area Setup" window by clicking the [
×
]
button at the top right of the window.
Содержание WJHD309 - DIGITAL DISK RECORDER
Страница 2: ...2...
