-50-
FOCUS
NEAR
FAR
AF
ZOOM
TELE
WIDE
CLOSEOPEN
IRIS
PRE-
POSI
1
2
3
4
5
6
7
8
9
MON
CAM
UNIT/ESC
SET
0
AUTO/+
AUX2
Camera control is only available while the camera
picture is displayed in Single Spot on the monitor
screen.
Note:
When controlling the camera with multiplexed
control data by connecting a coaxial cable, you
should install the optional WV-PB6164 Data
Multiplex Board in the Video Multiplexer.
■
Camera Selection
1. Set the LCD display to
✴
SPOT
or
✴
MLT
by repeat-
edly pressing the
F2
or
F1
button on the controller.
2. Select the camera
(VTR)
by pressing the
Function
(F4)
button on the controller.
3. Select the desired camera by pressing the numeric
keys, then press the
SET
key.
The selected camera picture is displayed in Single
Spot on the selected monitor screen.
■
Controlling System
Accessories
1. Lens Control
1. Select the desired camera referring the Camera
Selection above.
2. Press the
FOCUS
button to adjust the lens focus to
obtain a sharply focused picture while observing
the monitor.
If you are using the specified camera with auto
focus feature, you can adjust the lens focus auto-
matically by pressing the
AF
button.
CAMERA CONTROL
FUNCTIONS
3. Press the
ZOOM
button to adjust the lens zoom to
obtain the desired picture while observing the mon-
itor.
Press this button to the
TELE
position to optically
bring an object closer. Pressing to the
WIDE
posi-
tion has the reverse effect.
4. Press the
IRIS
buttons to close or open the lens
iris. Adjust the lens iris by using the buttons to
obtain the proper picture exposure.
By pressing both of these buttons at the same time
for three seconds, the lens iris is set to the initial
factory settings.
2. Pan/Tilt Control (Manual Operation)
1. Select the desired camera referring the Camera
Selection above.
2. Press the joystick to move the pan/tilt head in the
desired direction.
If the joystick is positioned in between UP and
RIGHT, the pan/tilt head moves diagonally upwards
and to the right.
3. Pan/Tilt Control (Preset Operation)
The following functions are only available with cam-
eras that have preset panning functions, such as
the Panasonic WV-BS500 or WV-CS600 series.
1. Select the desired camera referring the Camera
Selection above.
2. Press the
PRE-POSI
button, then select the preset
number by pressing the numeric keys.
3. Press the
SET
key to move the pan/tilt head to the
preset position.
4. Auto Panning
The following function is only available when the
specified Pan/Tilt Head is used.
1. Select the desired camera referring the Camera
Selection above.
2. Press the
AUTO
button to activate the auto pan-
ning function.
3. To cancel the auto panning function, press the joy-
stick controller in the desired direction.
