32
Recorder number (Unit Address (System))
VIDEO OUT 3
VIDEO OUT 4
VIDEO OUT 2
IN X-2
VIDEO OUT 1
ALARM IN
IN X-1
16
32
15
31
30
14
13
29
28
12
11
27
26
10
9
25
CAMERA IN
24
8
7
23
22
6
5
21
20
4
3
19
18
2
1
17
EXTENSION 3 IN
EXTENSION 2 IN
4
MODE
RS485 (CAMERA)
RS485 (CAMERA)
3
MODE
MODE
MODE
2
1
IN C-3
BNC cable
D-sub/BNC Video Cable WJ-CA68
32 31 30
25 24
17
16
9
8
1
Recorder
Recorder
Video input signals are supplied from
recorders to the CAMERA IN 31 and 32.
Video input
board
LCN: 17 to 32
Unit Address (System): 2
LCN: 1 to 16
Unit Address (System): 1
Do not connect VIDEO OUT of the unit to camera input connectors of recorders
if these camera input channels supply video output signals from recorders.
Note:
Do not connect the VIDEO OUT ports of the unit to the camera input connectors of recorders if these camera input chan-
nels supply video output signals from recorders.
●
Connection between Recorders and Video Input Boards
By connecting recorders to the DATA ports of this unit, recorder control becomes available from system controllers.
Note:
You can change data port settings according to the connected devices. Setting changes are performed in "System" –
"DATA Port" of WJ-SX650 Series Administrator Console or DATA PORT (refer to p. 53) of SETUP MENU.
1 to 4
5 to 8
9 to 12
13 to 16
DATA port for recorder connection
DATA 3 port of Video Output Board 1
(Factory default: HDR1)
DATA 4 port of Video Output Board 1
(Factory default: HDR2)
DATA 3 port of Video Output Board 2
(Factory default: HDR3)
DATA 4 port of Video Output Board 2
(Factory default: HDR4)
Notes:
• When changing connections, perform the LCN settings of camera input channels supplying video input signals to
recorders. The LCN settings are performed in "System" – "Recorder" – "LCN setting".
•
Camera input signals are looped through the unit. Monitor display information (camera title, etc.) are not recorded.
