56
Login and Logout
■
Operator Registration
Before logging into the system, operator registration is required. Operator registration is performed in "Operator" – "Operator" of
WJ-SX650 Series Administrator Console. The factory default of operator information is as follows.
•
Operator No.:
Number given for operator registration.
Up to 59 operators can be registered.
•
User ID:
ID number of operator controlling this unit. 1 to
99998 are available.
Note:
Begin the entry with a numeric other than "0".
•
Password:
For login, a password is checked as well as
a User ID. Up to 5 digits are available.
Note:
To protect system controllers from misuse, be
sure to change the factory default passwords.
•
Level:
An operator's restrict level. 1 to 5 are available. 1
is the highest, and 5 is the lowest.
Note:
Desired functions can be assigned to each level
in "Operator" – "Level Table" of WJ-SX650 Series
Administrator Console.
•
Priority:
Operator priority given to control a monitor,
camera, or recorder selected by another operator. 1 to
99 are available. 1 is the highest, and 99 is the lowest.
•
Camera Access:
View and control can be enabled or
disabled for each camera.
VIEW & OPERATE:
An operator can display the select-
ed camera image on the selected monitor. The
operator can also control the camera.
VIEW:
An operator can display the selected camera
image on the selected monitor, but cannot control
the camera.
- -:
The operator can neither display the selected cam-
era image on the selected monitor nor control the
camera.
•
Recorder Access:
View and control can be enabled or
disabled for each recorder.
VIEW & OPERATE:
An operator can display the select-
ed recorder image on the selected monitor. The
operator can also control the recorder.
VIEW:
An operator can display the selected recorder
image on the selected monitor, but cannot control
the recorder.
- -:
The operator can neither display the selected
recorder image on the selected monitor nor control
the recorder.
•
Monitor Access:
Control can be enabled or disabled
for each monitor.
Notes:
• Monitor Access is set for each DATA port.
Operators logging into the system from the same
DATA port have the common setting.
• Monitor Access setting is not applied for operators
logging into the system from the PC connected to
the SERIAL port.
• Monitor Access setting is performed in "Controller" –
"Monitor Access" of WJ-SX650 Series Administrator
Console.
Operator No.
1
650
650
1
1
View & Operate
(All cameras)
View & Operate
(All recorders)
2
1
12345
1
1
View & Operate
(All cameras)
View & Operate
(All recorders)
3
100
100
2
5
View & Operate
(All cameras)
View & Operate
(All recorders)
4
101
101
3
10
View & Operate
(All cameras)
View & Operate
(All recorders)
5
102
102
4
30
View & Operate
(All cameras)
View & Operate
(All recorders)
6
103
103
5
50
View & Operate
(All cameras)
View & Operate
(All recorders)
User ID
Password
Level
Priority
Camera Access
Recorder Access
