Panasonic WJ-SX650/G Скачать руководство пользователя

Страница: 20 / 100

■

Board Mounting Procedure

The following example is the procedure to mount a network
board into the expansion slot of the unit.

Note:

Before the procedure, power off the unit.

1. Remove the expansion slot panel from the rear side.

2. Mount the rear boards into the expansion slot, and fix

these boards with screws supplied to the rear boards.

Notes:

• The board name (IN X-1, OUT X-1, etc.) is marked at

the lower right corner of each board mounting angle.
When mounting the rear boards, match the board
names with the markings at board mounting angles.

• To mount a set of video output board into the expansion

slot, dismount the IN B-3 board, and then mount the
OUT X-3.

3. Remove the front panel by loosening the screws.

4. Remove the blank panel from the front side.

5. Mount the main board by hooking the board stoppers

on the board stopper angles at the front side, by push-
ing down the board stoppers, and by fixing the screws.

Notes:

• Remove 3 screws surely at the arrow marking when dis-

mounting.

• When mounting, match the main board surely with the

rear board.

• When mounting, insert the main board surely into slits.
• Do not hit the boards against the chassis of the unit.

SIGN

AL G

SIGN

AL G

TERM

.ON

MODE

TERM

.OFF

MODE

DAT

A 4

HDR

4/TM

NL8

HDR

2/TM

NL4

DAT

A 3

HDR

3/TM

NL7

HDR

1/TM

NL3

DAT

A 2

TMN

DAT

A 1

TMN

TMNL

1/PS

DATA

Vide

o Ou

tput B

oard

Vide

o Ou

tput B

oard

Board stopper angle

Board stopper

•

Mount the main board into the slot.

•

Fix the board with the screws (x3).

•

Attach the fixing brackets (x2) with the screws (x4).

Fixing brackets (x2)

Screws (x4)

Hook the board stoppers
on the board stopper angles, and
push down the board stoppers.

Matrix S

witcher W

J-SX

650

OPER

ATE

SIGN

AL G

SIGN

AL G

TERM

.ON

MODE

TERM

.OFF

MODE

DAT

A 4

HDR

4/TM

NL8

HDR

2/TM

NL4

DAT

A 3

HDR

3/TM

NL7

HDR

1/TM

NL3

DAT

A 2

TMN

DAT

A 1

TMN

TMNL

1/PS

DATA

Vide

o Ou

tput B

oard

Vide

o Ou

tput B

oard

IN X-2 board

IN X-1 board

Blank panel

Содержание WJ-SX650/G





































































































Результаты поиска

Содержание WJ-SX650/G

Отзывы:

Похожие инструкции для WJ-SX650/G

Бренды по названию

Популярные бренды

Panasonic WJ-SX650/G, Руководство по эксплуатации

Результаты поиска

Содержание WJ-SX650/G

Отзывы:

Похожие инструкции для WJ-SX650/G

Бренды по названию

Популярные бренды