Panasonic WJ-NX400G-54000T6 Скачать руководство пользователя страница 207

Страница: 207 / 224

207

[Connection test]

Click the [Execute >] button, the system starts the connection test and displays [Results/Free].

[Schedule setup of the NAS backup]

Click the [Setup >] button to set cameras to be backed up, a file format and a schedule.
(

⇒

Refer to "Configure the schedule settings")

[Current backup status]

Displays the storage destination connection status.

Normal (Storage-1), Normal (Storage-2) : Backup is available.
Error (No remaining capacity)

: No remaining capacity on storage destinations.

Error (Communication)

: No communication available and storage destination is not

mounted.

Blank

: The NAS is invalid or has never been connected.

[Re-connect] button

Click the [Re-connect] button, the system starts the connection test with storage destination 1 and 2 and dis-
plays the connection status.

[Backup error history]

Click the [View >] button to display the backup error history screen.
If the backup did not complete on the backup execution date, the time range that could not be backed up will
be displayed at midnight on the next day.

[Recording date and time when the backup was interrupted.]

Displays the time range that could not be backed up.

[Log]

Displays the reason why the backup could not be done.

Not backed up yet (No remaining capacity) : The remaining capacity of the storage destination ran out dur-

ing backup.

Not backed up yet (Interrupted)

: The backup was not completed because the schedule period

expired, the backup stopped due to a setting change, etc.

Not backed up yet (Failed)

: The backup stopped because an error occurred.

No recording data in HDD

: There was no recorded data of the target date because it was

overwritten or the HDD broke down.

Click the [Back] button to close the backup error history screen.

Содержание WJ-NX400G-54000T6

































































































































































































































Результаты поиска

Содержание WJ-NX400G-54000T6

Отзывы:

Похожие инструкции для WJ-NX400G-54000T6

Бренды по названию

Популярные бренды

Panasonic WJ-NX400G-54000T6, Руководство по эксплуатации

Результаты поиска

Содержание WJ-NX400G-54000T6

Отзывы:

Похожие инструкции для WJ-NX400G-54000T6

Бренды по названию

Популярные бренды