199
Register the network microphone
Step 1
Register the network microphone and the fisheye
camera with the recorder.
The network microphone can be registered via Net-
work in the same manner as the Panasonic cameras.
Note:
• Registration of a network microphone occupies
one camera registration field in the setup window.
• When a network microphone is detected, its ID
(last 4 digits of the MAC address) will be displayed
in "Results".
Step 2
Select a camera number of the fisheye camera in
"Audio" of "Advanced recording setup".
Important:
• Set the connection method of the recorder and
the fisheye camera to HTTP. If HTTPS is set, the
audio of the fisheye camera cannot be recorded.
(
☞
Operating Instructions Secure Communication Kit)
Note:
• Only the camera number registered in the
"Fisheye" (FE), "F Double Panorama"
(FE+DP), "F Quad PTZ" (FE+4PTZ), or
"Panorama" (P) mode of the fisheye camera can
be selected.
• The same fisheye camera cannot be selected for
"Audio" of the multiple network microphones.
• Automatically "On" will be set for the "Audio" of
the fisheye camera selected by "Audio" of the net-
work microphone.
• Automatically "Off" will be set for "Audio" of the
fisheye camera deselected by "Audio" of the net-
work microphone.
• The network microphone will perform audio
recording according to the schedule of the
selected fisheye camera.
• Even if RTSP is set for the connection between
the recorder and the fisheye camera, the connec-
tion with the network microphone will be RTP.