Panasonic WJ-NV200K Скачать руководство пользователя

Страница: 18 / 102

Major operating controls and their functions

Front view

Status indicators

ERROR:

Blinks when an error that can become a prob-

lem for the recorder to run the system occurs.

Blinks red:

System error

Blinks orange:

Thermal error, cooling fan malfunc-

tion, etc.

OPERATE:

Lights when the power is on.

HDD [HDD1]/[HDD2]:

Indicates the operational status

(access/failure) of the respective hard disk drive.

Blinks green:

Indicates that the respective hard disk

drive is being accessed.

Lights red:

Indicates that a fault (or an error) has

occurred on a hard disk drive.

Off:

Indicates that the respective hard disk drive is

not being accessed.

REC:

Lights orange when recording is being performed.

ALARM:

Blinks when an alarm occurs, and lights when

the alarm output stops. This indicator will go off
when the [Reset] button (

☞

Operating Instructions

(PDF)) is clicked.

Buzzer stop button [BUZZER STOP]

Press this button to stop the buzzer that started sound-

ing at an alarm/error occurrence. Refer to the operating
instructions (PDF) for further information about alarms
and errors.

DVD drive

Recorded images can be saved on a DVD disc (com-

mercially available). (

☞

Page 19)

Mouse connection port [MOUSE]

The provided mouse is connected to this port.

Restart button [RESTART]

Press this button to reboot the recorder. When pressing

this button, use a sharp object such as a clip.

SDHC/SD memory card slot

Recorded images can be saved on an optional SD

memory card. (

☞

Page 19)

(This illustration represents WJ-NV200VK.)

* It is impossible to connect a mouse to the mouse connection port if the

connector from the mouse is upside down. When it is hard to connect,

check the upside down position of the connector from the mouse.

SDHC/SD memory card slot

Restart button

Mouse connection port

Buzzer stop button

Status indicators

DVD drive (commercially available, only for WJ-NV200VK)

Содержание WJ-NV200K







































































































Результаты поиска

Содержание WJ-NV200K

Отзывы:

Похожие инструкции для WJ-NV200K

Бренды по названию

Популярные бренды

Panasonic WJ-NV200K, Руководство по установке

Результаты поиска

Содержание WJ-NV200K

Отзывы:

Похожие инструкции для WJ-NV200K

Бренды по названию

Популярные бренды