Panasonic WJ-NV200K, Руководство по установке

Страница: 47 / 102

47
Change the registered information [Registered information]
Click the [Setup >] button for "Registered information" on the [Camera registration] tab to display the following items.
After editing the settings, click the [OK] button to save the settings and return to the [Camera registration] tab.
[Camera]
Up to 16 cameras can be connected.
[Model]
The model of a registered network camera will be displayed.
(Blank: Camera is not registered)
Click the [
C
] button to select the camera model from the
camera categories. Refer to the "readme.txt" on the provid-
ed CD-ROM for camera categories.
It is unnecessary to change it for normal use.
[Address]
An address already in use will be displayed. The address can
be changed using the on-screen keyboard. Enter up to 255
alphanumeric characters including hyphens (-) and periods
(.).
[Compression]
Select the image compression method.
H.264/ MPEG-4/ MJPEG
Note:
• When selecting "MJPEG" for "Compression", the live
image transmission rate and the frame rate will be
changed automatically to "5 ips". (
☞
Page 52)
• When selecting "MPEG-4" for "Compression, the image
size will be changed automatically to "VGA".
(
☞
Page 53)
• When selecting "H.264" for "Compression", it will
become possible to select "XF" for the image quality set-
ting.
• Depending on the model of the camera, the camera may
reboot when the compression method is changed. The
reboot will be detected as a communication error, but
that is not a malfunction.
[User name]
Enter the user name for accessing the cameras and logging
in using the on-screen keyboard. (
☞
Page 37) Register the
user name whose access level is "Administrator".
[Password]
Enter the password to be used for the user whose name has
been registered as "User name". (
☞
Page 37) (Up to 32
alphanumeric characters)
[Port No.]
Set a port number from 1 - 65535 for use by the camera.
Default: 80
[Table to delete]
To delete registration information or remove a previously
connected camera, either select the camera number and
click the [Delete] button, or set a blank for the address of the
respective camera.