Panasonic WJ-NV200K, Руководство по установке

Страница: 50 / 102

50
[Display Title]
To transmit the settings to the camera, mark this item, and
edit the title displayed on the image. Clicking the [Edit >] but-
ton will display the following title editing window:
• [Display Title]
Enter a character string to be displayed on the image
using the on-screen keyboard. (
☞
Page 37) (Up to 16
alphanumeric characters)
Available characters: 0-9, A-Z and the following marks.
! # $ % ( )* + , - . / : ; = ? (space)
• [Camera title]
Display the camera title registered on the [Main monitor]
tab of the monitor page (
☞
page 62).
• [Copy] button
The camera title registered on the [Main monitor] tab of
the monitor page can be used as display title. Clicking
this button will copy the camera title to the "Display Title"
field.
• [Back] button
Click the button after completing the settings. This will
close the window.
Note:
• Refer to page 49 for further information about "Camera
Selection", the [Transmission] button and the [Back] but-
ton.
Set up the refresh interval [Refresh interval]
Select the image refresh interval for each camera and transmit it to the cameras to change the camera settings.
Clicking the [Setup >] button for "Refresh interval" on the [Camera setup] tab will display the setup page.
[Refresh interval]
Select an interval to update the image display. If used in a network environment where frequent errors occur, shorten the refresh
interval to reduce image distortions. However, the refresh interval may be longer than the set value.
0.2 s/ 0.5 s/ 1 s/ 2 s/ 3 s
Default: 1 s
Important:
• Image transmission from the camera will temporarily be canceled and no image will be recorded during this period if the set-
ting to change the refresh interval is transmitted to the camera.
Set up VMD alarm [VMD alarm]
Select the VMD function for each camera and transmit the information to the cameras to change the camera settings.
Clicking the [Setup >] button for "VMD alarm" on the [Camera setup] tab will display the setup page.
[VMD alarm]
Select whether or not to use the VMD (VMD: Video Motion Detection) alarm function when a change (movement) is detected in
the image. Refer to the operating instructions of the camera in use for how to configure the VMD alarm.
On: Detects alarms.
Off: Does not detect alarms.
Default: On
Set up Super Dynamic [Super Dynamic]
Select the Super Dynamic function for each camera and transmit the information to the cameras to change the camera settings.
Clicking the [Setup >] button for "Super Dynamic" on the [Camera setup] tab will display the setup page.
[Super Dynamic]
Select "On" or "Off" to determine whether or not to activate the super dynamic function.
On: The super dynamic function will work.
Off: The super dynamic function will not work.
Default:
On