Programming
47
Setting the contact closure (CONTACT CLOSURE SELECTION)
If a device is connected to the K1/K2 terminal of the main monitor station (For information about the K1/K2 terminal, refer to
page 5 on the Installation Guide), it is also able to receive calls from the door station or the camera (optional). You can specify
the door station or camera from which the device can receive calls.
You can perform this operation using the main monitor station.
L�
The default setting is “ON” for all devices.
L�
The device does not receive calls from door stations or cameras that are set to “OFF”.
1
During standby, press and hold
{
SET
}
for about 3 seconds.
2
Select “OTHER” by pressing
{
▼
}
or
{
▲
}
.
3
Press
{
D
}
then select “CONTACT CLOSURE SELECTION” by pressing
{
▼
}
or
{
▲
}
.
TIME AND DATE
RINGER TONE
RINGER SELECTION
CONTACT CLOSURE SELECTION
EXTERNAL DEVICE
DOOR STATION CONNECTION
DOOR KEY
DOOR STATION AUTO RECORDING
PICTURE RECORD ALLOCATION
1/2
FUNCTION SETTINGS/OTHER
BACK
OK
4
Press
{
D
}
then select the desired device by pressing
{
▼
}
or
{
▲
}
.
5
Press
{
D
}
then select “ON” or “OFF” by pressing
{
▼
}
or
{
▲
}
.
6
Press
{
D
}
.
L�
“
l
” moves to the selected item.
↓
(Returns to the display of step 4.)
7
To end the operation, press
{
OFF
}
.
VL-SW102BX_OI.indb 47
2006/06/12 15:35:22
