Recording
35
Erasing an image
You can erase an unnecessary image. (You can operate this feature in the same way by using either the main monitor station
or the sub monitor station.)
{
OFF
}
{
▲
}
{
D
}
{
OFF
}
{
D
}
{
▲
}
1
While viewing the image, press and hold
{
D
}
for 2 seconds or more.
L�
To view the recorded images, see page 32.
(When erasing a single image:)
DELETE?
▲
YES
▲
NO
(When erasing 4 continuous images:)
(Sub monitor station)
(Main monitor station)
SERIES
OF
PICS
DELETE?
▲
YES
▲
NO
SERIES
OF
PICTURES
DELETE?
▲
YES
▲
NO
L�
If you erase one of 4 continuous images, all 4 images are erased together.
2
Press
{
▲
}
.
L�
The image is erased, and the next image is displayed.
3
To end the operation, press
{
OFF
}
.
Note:
L�
The image erased by using the sub monitor station is also erased from the main monitor station because the recorded
images are stored in the main monitor station.
L�
If you try to erase the protected image, “PROTECTED PICTURE RELEASE PROTECTION” (main monitor station) or
“PROTECTED PIC RELEASE PROTECTION” (sub monitor station) message appears. Release the protection setting
beforehand (page 32).
L�
You can erase all images including unviewed images and protected images at once (“DELETE ALL PICTURES” on page
42).
VL-SW102BX_OI.indb 35
2006/06/12 15:34:43
