Doorphone
21
Answering a call
When you receive a call from a door station, the main monitor station and the sub monitor station ring and the TALK indicators
flash. You can monitor the visitor on the monitor display before answering a call.
{
OFF
}
{
TALK
}
TALK indicator
{
BRIGHT
}
{
▲
}
{
▲
}
{
OFF
}
{
TALK
}
TALK indicator
{
▲
}
{
▲
}
{
BRIGHT
}
1
When a ringer tone is heard, press
{
TALK
}
.
2
Speak to the visitor.
L�
Speak alternately with the visitor.
(If you and the visitor speak at the same time, you will not hear each other.)
N�
To adjust the speaker volume:
Press
{
▲
}
or
{
▲
}
.
N�
To adjust the display brightness:
Press
{
BRIGHT
}
(page 11, 13).
3
To end the conversation, press
{
OFF
}
.
Note:
L�
If you do not answer a door call within 30 seconds, the display will turn off.
A conversation will be automatically disconnected in about 90 seconds and then the display will turn off.
To turn on the display and talk to the visitor again, press
{
TALK
}
.
L�
The image taken by the door station is automatically recorded. Even if you do not answer a call, the image is recorded
(page 30).
L�
You can record an image manually while monitoring the display during a call (page 31).
L�
You can change the ringer tone and the ringer volume (page 43, 44).
L�
At night or when there is not enough lighting in the doorway, the display will be shown in black and white.
When using an additional door station or camera:
L�
When you receive another call from an additional door station or an additional camera while receiving a previous call, the
display is switched to the image from the device calling later.
L�
When you receive another call from an additional door station or an additional camera during conversation, see page 24.
VL-SW102BX_OI.indb 21
2006/06/12 15:34:01
