150
QR34662
Error Messages
A message may appear while you are operating the DVD Palmcorder. If a message appears, refer to the
following table and take appropriate corrective action.
Messages on page 149 and later are arranged in alphabetical order.
Message
Cause & Troubleshooting
Reference
page
(1) Data error in a part of
image file. Repair data
now?
(2) Found error in image
file. Repair data now?
(3) Data error in all
image file. Repair all
data now?
It is possible that the system cannot normally complete writing of file
when power is turned off for some reason during recording or
editing (deleting, dividing or combining scenes, or creating play list).
Selecting “YES” will automatically repair the video file, but even if
“NO” is selected, the same message will appear when the DVD
Palmcorder is turned on next time. (Do not remove the disc while the
DVD Palmcorder is recognizing it: Ignoring this will deactivate the
file repair function.)
Follow the instructions on screen, taking note of the following
cautions:
•
Data may not be repaired, depending on the timing when power
was turned off.
•
Data may not be repaired normally if data recorded on another
recorder is mixed in.
•
The repaired data may be different from the original recorded
content because of partial deletion of defective portion.
•
Since the date/time for repair is added to the repaired data (only
the corrected portion for partial repair), the original date/time
information will be lost.
•
Since all movies, and then all stills, are repaired, the order of
recorded contents will be lost.
(In case of message (2) (3) only)
•
See *1 on page 156.
(1) Disc is not formatted.
If it formats, it becomes
possible to use for
camera.
(2) However, when you
record from USB
terminal, please do not
format.
(3) Format the disc now?
DVD-R disc that was not initialized for camera use was inserted.
44
(1) Error has occurred.
Please restart.
•
Error has occurred. Try to restart the DVD Palmcorder using the
following methods:
(1) Turn power off, remove the battery pack or AC adapter/charger
and reattach it, and then turn power on again.
(2) Turn power off, and reinsert the disc. Then turn power on again.
(3) Take note of the number (xxxx), and call 1-800-211-PANA.
•
See *3 on page 156.
9, 39, 42, 43
(2) Error has occurred.
Please reinsert a disc.
(3) Error has occurred.
Error code No. xxxx.
Please read the manual.
(4) ERROR xxxx
Battery pack is almost
empty. Replace it.
Replace with a charged battery, or use AC adapter/charger to
power the DVD Palmcorder.
38, 42
Cannot combine scene. Unless consecutive scenes are selected, they cannot be combined.
109
VDR-M30PP_GB.book Page 150 Friday, March 14, 2003 8:53 PM
