background image

USB Connector ARM

Extending the USB Connector ARM:

1.   Rotate the LCD screen 180

o

 to show the USB Connector ARM.

2.  Rotate the USB Connector ARM 180

to extend it.

3.  Replace the LCD screen.

• 

Refer to “Connecting to a PC” overleaf for more information.

• 

Use USB Extension Cable (provided) if USB Connector ARM is obstructed or space does not 
permit connection to PC.

• 

Reverse the steps above to retreat the ARM.

Getting started

Battery installation

1.  Push (to the right) and hold the front cover lock at the bottom of the camcorder. 
2.  Slide the front cover down and then lift up to open.
3.  Replace or install 2 AA batteries. 
•  Make sure you align the battery polarities as indicated.
•   In the case of low battery, a low battery icon ( 

 ) will fl ash on the screen. Please change 

batteries when battery icon is fl ashing. 

•   Alkaline batteries are recommended for best results under normal use. For extended video 

shooting, Energizer e2 Lithium AA batteries are recommended. 

4.  Replace the front cover and slide up to lock.

v1.0 (EN)

Using your camcorder

QuickStart

Guide

 

EZ200 RCA Small Wonder Camcorder

www.mysmallwonder.com

Congratulations on purchasing your new RCA Small Wonder Camcorder.

Please read these instructions for quick tips on using the product.

Turn on/off 

1.   Press 

ON/OFF

 to turn on.

2.   Press and hold 

ON/OFF

 to turn off .

• 

Camcorder will automatically turn off  after 2 minutes if not in use.

Record

 

 

Press and release the red RECORD button   (after 
“READY” appears on the screen) to begin recording.

While recording:

•   A red   and the elapsed time appears at the top 

left corner of the screen.

•   The red recording light on the camcorder front 

turns on.

Pausing a recording:

•   Press 

PLAY/PAUSE

.

•   A pause indicator 

II 

replaces the red   at the top 

left corner and “Recording Paused” fl ashes in the 
middle of the screen.

•  To resume recording, press and release 

PLAY/

PAUSE

 again.

Stop

While playing or recording, press and release the red 
RECORD button   to stop the playing or recording.

Play

1.   Press 

PLAY/PAUSE

 to start playback of the most recent recording or the selected video. 

To select another video, refer to 

Selecting videos

.

2.   Press and hold 

PLAY/PAUSE

 for three seconds to play all videos.

• 

If no video is selected after playback has fi nished, recording mode will resume after 5 seconds.

Search forward/backward: 

• Hold 

down  to fast forward the selected video during playback.

•   Hold down 

 

to fast rewind the selected video during playback.

Pausing video playback:

• Press 

PLAY/PAUSE

 to pause playback (a pause indicator 

II 

and the remaining playback 

time fl ash at the top left corner of the screen).

•   Press 

PLAY/PAUSE

 again to resume playback.

Selecting videos:

•   Press and release   to cue the next video.
•   Press and release 

 

to cue the previous video.

Delete

1.   Press 

DELETE

 and the last recording and “DELETE VIDEO ?” appear on the screen.  

•   To select another video, refer to 

Selecting videos

.

2.  Press and hold 

DELETE

 until the selected video is deleted.

3.  To delete all videos, press & hold 

DELETE

 for 3 seconds and then repeat step 2.

Take photo 

•  Press and release 

WEB PHOTO

 to take photo.

Zoom

 

Before or during recording:

•   Press 

to zoom in.

•   Press 

 to zoom out.

Volume

During playback:

•   Press 

+

 to increase volume.

•   Press 

 to decrease volume.

Recording indicator

Camcorder strap hole

Tripod screw mount

Video quality selector

 

HQ: High Quality mode 
webQ: Web quality mode 
•  The selected setting (HQ or webQ) appears on the display screen during recording.
•  The HQ setting is recommended when planning to view video on a TV directly from the 

camcorder.

Settings

  

HQ 
webQ 

Quality 

 

BEST 
GOOD 

Approximate recording duration*

30 minutes 
60 minutes 

* Recording duration is based on 1 GB microSD card. Actual recording 
capacity depends on type of video content being recorded.

LCD screen

For self recordings, the LCD 
screen can be rotated 180

o

.

Front cover

Refer to 

Battery installation 

for more 

information.

Microphone

 

Lens

 

Back view 

Front view 

Left view 

Bottom view 

Right view 

AV output

 

Audio/Video output for connecting to TV or other 
AV equipment with the included AV cable. 

• 

Refer to “Viewing videos on TV” and “Recording videos to VHS 
tape or DVD” overleaf for more information.

Audio speaker

Front cover lock

Important battery information

•  Any battery may leak electrolyte if mixed with a diff erent battery type, if inserted 

incorrectly, or if all batteries are not replaced at the same time.

•   Any battery may leak electrolyte or explode if disposed of in fi re or an attempt is made to 

charge a battery not intended to be recharged.

•   Discard leaky batteries immediately. Leaking batteries can cause skin burns or other 

personal injury. When discarding batteries, be sure to dispose of them in the proper 
manner, according to your state/provincial and local regulations.

Setting date and time

1. Press   or   to shift among month, date, hour and minute and press 

+

 or 

 to set the 

date/time values.

2. Press   or   to select 

DONE 

and then press the red RECORD button   to save settings. Or 

press 

DELETE

 to exit without saving.

•  Date and time setting can be accessed by pressing and holding 

PLAY/PAUSE

 and 

ON/OFF

 

together while the camcorder is turned off . 

1

2

3

microSD memory card

•  A microSD memory card is included and already inserted in the camcorder. It is installed 

between the batteries in the front compartment.  

•  To remove card, push card in until a click is heard and the card will pop out slightly, then 

remove the card.

•  To insert card, align card with Card Symbol on camcorder and slide in until a click is heard. 

The card icon (   ) appears on the screen with memory card inserted. 

1

2

3

4

Front compartment 

microSD card

Отзывы: