Panasonic VARICAM LT, Руководство по эксплуатации

Страница: 12 / 182

– 12 –
Chapter 2 Description of Parts — Camera
13 <VF SDI> terminal
An output terminal of 3G/HD SDI for connecting the viewfinder.
Use the BNC cable supplied with the viewfinder or the double-shielded cable equivalent to 5C-FB when connecting a cable to this terminal.
14 <DC OUT> terminal (page 32)
An output terminal to supply viewfinder power supply DC 12 V. Maximum of 1.0 A current can be provided.
Use the DC cable supplied with the viewfinder when connecting a cable to this terminal.
15 Fan inlet
Fan inlet for dissipating heat. Do not block this when the camera is in use.
16 <LENS/GRIP> terminal
Terminal for connecting a lens cable. For details, refer to the Operating Instructions for the lens.
Cable for the grip module AU-VGRP1G (optional) can also be connected.
Front
2
3
4
5
1
1 Accessory mounting holes
For attaching accessories.
f
Mounting hole size
- 3/8-16 UNC (screw length 5.5 mm or shorter)
2 Lens cable clamp
A clamp for securing the lens cable.
3 EF lens mount
EF lens is mounted.
4 <FILTER> dial
<1><CLEAR>: Does not use the ND filter.
<2><0.6ND>: Reduces the amount of light entering the image sensor to 1/4.
<3><1.2ND>: Reduces the amount of light entering the image sensor to 1/16.
<4><1.8ND>: Reduces the amount of light entering the image sensor to 1/64.
5 Mount cap
Attach the cap when the lens is not mounted.
Rear
4
2
1
3
5
6
7
8
1 Battery holder
For mounting Anton/Bauer batteries.
2 Battery release lever
Pull this battery release lever down to release the battery.